Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors in Henderson: What to Know First
We provide independent CGI sliding and patio door service in Henderson, and most repairs, hardware swaps, and screen replacements are finished in a single visit. Full door replacements take longer because they involve permitting, ordering, and a scheduled install, so you get a written timeline with your quote. We won’t claim to be the cheapest bid you’ll get, and we won’t sharpen a pencil to win a job we’d have to cut corners on. CGI builds a solid door; what goes wrong in Henderson is usually installation, hardware wear, or the desert working on seals and tracks. If you own a CGI slider, a patio door, or an impact French door and something is dragging, leaking, or fogging, call us at (833) 842-6670. A live person answers, day or night.
How CGI Products Fail – and How We Fix Them
- Rollers flat-spot and the panel drags (CGI Estate and CGI Sentry sliding doors). The factory steel rollers on these lines are built for moderate traffic, and in a house where the patio door gets opened twenty times a day for a dog, grandkids, and the grill, they develop flat spots within a few years. You’ll feel it before you see it: the panel hesitates, then jumps. We replace the roller set with a sealed-bearing assembly rated for heavier panels and re-level the track so the door glides on the full width of the wheel instead of one worn edge.
- Screen frames bow and the spline pulls out of the groove. Henderson’s summer heat cycles the aluminum screen frame more than most owners realize, and a frame that fit tight in March can be a quarter-inch shy of square by August. The screen starts popping out at the bottom corner. We rebuild the frame on a flat table with new spline and fresh mesh rather than trying to force the old frame back into shape.
- Weep holes clog and water backs up behind the sill (common on CGI impact sliders). Impact-rated doors have a deeper sill channel, which is good engineering and a magnet for fine desert dust and blown irrigation grit. Once the weep holes stop draining, water sits against the interior threshold and you get staining on the drywall below. We clear and flush the channels, then check the sill pan for standing water with a hose test before we call it done.
- Weatherstripping hardens and the door whistles in a west wind. CGI uses a foam-and-fin seal on the jamb and an interlock gasket between panels. Both go brittle in our low humidity, and the first sign is a draft or a whistle during a spring wind event, not a visible gap. We replace the interlock and jamb seals with UV-stable material and confirm the panel meets the jamb with even contact top to bottom.
- Fogged glass in the sealed unit, not the frame. A CGI dual-pane or impact unit that fogs between the panes has failed at the seal, not at the door. The frame is usually fine and doesn’t need to come out. We measure the IGU, confirm the spacer type and gas fill, and set a replacement unit. We’ll also tell you plainly when a seal failure is a manufacturing defect worth pursuing under warranty versus wear that isn’t.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Sliding & Patio Doors Process
- 1
Diagnose on site. We measure the opening twice, check the panel for square, test the rollers, and hose-test the sill. We look at the glass seal, the interlock, and the head and jamb for movement. You get a written line-item quote before anyone touches a screwdriver.
- 2
Decide OEM versus aftermarket, on paper. Some CGI parts are worth ordering from the manufacturer; rollers, seals, and screens are often better served by a quality aftermarket equivalent at a lower cost. We quote both where it matters and tell you which one we’d put in our own house and why. Nothing gets substituted without your sign-off.
- 3
Do the repair. Background-checked, uniformed technicians work clean, lay drop cloths, and keep the work area contained. Most repairs are done in a single visit.
- 4
Test it like we mean it. The door gets opened and closed a dozen times, the screen gets cycled, the sill gets hose-tested, and the lock gets checked for alignment. If the pane is not true, the job is not done.
- 5
Register the warranty layers before we leave. Under The Keystone Standard, both manufacturer warranty layers are registered in writing and the durations are stated to you before the truck pulls out of the driveway. No paperwork fights later.
- 6
Back it for 90 days. If something we touched isn’t right, the 90-Day Done Right Promise covers it. We come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Sliding & Patio Doors Costs in Henderson
Here’s the honest range for the CGI work we do most in Henderson. These are typical figures; your quote is written line by line before any work starts.
- Roller replacement and track re-level: $180 to $340 per panel
- Screen door rebuild or replacement (frame, mesh, spline): $95 to $220
- Weatherstripping and interlock seal replacement: $140 to $280
- Weep hole cleaning, sill flush, and hose test: $85 to $160
- Sealed glass unit (IGU) replacement: $320 to $650 depending on size and impact rating
- Full sliding or patio door replacement, installed: $2,400 to $6,800, driven by size, impact rating, and whether the opening needs any modification
What moves the number: impact-rated glass costs more than standard, oversized openings cost more, and doors that need the opening reworked take longer. A senior or veteran discount of 5% applies, and there’s $50 off any repair over $250. Call (833) 842-6670 for a free estimate; we quote manufacturer lines side by side so you see exactly what you’re buying.
Why Henderson Homeowners Call TruePane Windows & Doors Henderson for CGI Work
We’re an independent CGI service provider, which means we’re not tied to a single factory and can tell you the truth about what a part costs and whether a repair is worth it. Our technicians have up to 18 years of experience, and they know the CGI lines that show up in Henderson homes: Estate, Sentry, and the impact series. When a CGI part is back-ordered or discontinued, we have real options. We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems, so a matched replacement is a conversation, not a dead end. Over 42 years serving local communities, we’ve learned that the last call is the one that counts. Done right the first time, backed in writing, and we’ll be there when we say. Call (833) 842-6670.
FAQs
Will repairing my CGI door void the warranty? No, not when it’s done correctly. Wear parts like rollers, seals, and screens aren’t typically covered by the manufacturer warranty anyway, and using quality aftermarket equivalents for those doesn’t affect the frame or glass coverage. What does risk a warranty is a botched install or a part forced into place. We document what we replace and register both warranty layers in writing under The Keystone Standard. If you’re unsure what your CGI warranty covers, call (833) 842-6670 and we’ll walk through it with you.
Can you still get parts for an older CGI sliding door? Usually, yes. Common wear parts for the Estate and Sentry lines are still available, and where a factory part is discontinued we source a matched aftermarket equivalent of equal or better spec. If nothing fits, we’ll tell you straight and quote a replacement door instead of forcing a part that won’t last. Estimates are free, so call (833) 842-6670.
Should I repair or replace my CGI patio door? Repair it if the frame is sound and the problem is rollers, seals, screens, or a single fogged unit, which is most of what we see in Henderson. Replace it if the frame is out of square, there’s rot or water damage at the sill, or you’re upgrading to impact glass. We’ll give you both numbers in writing so the decision is yours, not ours. Call (833) 842-6670 for a free estimate.
How fast can you get to my CGI door? A live person answers the phone 24 hours a day, seven days a week, and most repairs are scheduled and finished in a single visit. Replacements depend on lead time for the door, and we’ll tell you the timeline upfront. Call (833) 842-6670 to get on the schedule.
Do you handle impact sliding glass doors, or just standard ones? Both. Impact-rated CGI sliders need a different touch on the sill and seals, and we test the drainage on those specifically because the deeper channel collects dust faster in Henderson. We also work on impact French patio doors and screen doors. Call (833) 842-6670 to talk through what you have.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.