A TruePane company - serving Henderson, NV

CGI Custom Windows & Doors in Henderson, NV

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CGI Custom Windows & Doors in Henderson: What to Know First

We provide independent CGI custom windows and doors work in Henderson, from a single hard-to-fit slider to a whole-home package on a 1990s build. When it’s a replacement-and-install job, most Henderson projects are quoted in a single visit and finished on one scheduled day; when it’s a repair on a working CGI unit, most jobs close in a single visit too. On price we are not the cheapest bid in the room, and we say so plainly: custom CGI work in Henderson runs roughly $850 to $3,200 per opening depending on series, glass package, and how much framing the wall demands, and you get it on paper before anyone touches the house.

Call (833) 842-6670

This page is for the owner who already has CGI windows or doors in the wall, or who is set on CGI for the numbers, and wants the work done once, correctly, by people who have actually set these units. A live person answers the phone around the clock; call (833) 842-6670 for a free estimate.

How CGI Products Fail – and How We Fix Them

  • CGI Sentinel slider tracks that bind by July. Henderson’s summer thermal swing pushes aluminum track and sill assemblies just enough that a slider gliding fine in April drags by July. It’s rarely the rollers alone; it’s the roller-to-track alignment drifting with the frame. Our fix is to re-set and re-shim the frame plane, replace the roller set with a matched pair, then adjust the interlock so the panel seals without forcing. We test the glide by hand in the afternoon heat before we call it done.
  • Seal failure and fogging in fixed lites. The dual-pane sealed units in CGI’s fixed and picture configurations fog at the perimeter when the butyl seal gives way, and it happens faster on west- and south-facing glass in Henderson, where afternoon sun loads the unit hard. A fogged unit can’t be cleaned back to clear. We order the sealed unit to the exact IG specification and glass type so the replacement matches the rest of the home, then re-glaze with a fresh setting block and proper drainage.
  • Threshold and sill leaks below grade. CGI patio and multi-slide threshold configurations rely on a weep and drainage path that clogs with Henderson’s wind-blown dust. Water backs up, finds the interior sill, and shows as a stain on the drywall weeks later. We pull and clean the drainage channels, verify the sill pan and flashing, and re-seal the threshold with a sealant that stays flexible through the summer heat cycle.
  • Operator and multipoint hardware wear. On CGI casement and awning lines, a crank that’s stiff or a multipoint lock that catches usually means a worn operator or a strike plate that’s drifted out of alignment, not a defective sash. We keep OEM hardware on hand for the common CGI operators and replace the mechanism rather than forcing the sash, which is how frames get twisted.
  • No warranty paperwork at the original install. This is the quiet one. Plenty of CGI units in Henderson were installed without the manufacturer warranty layers ever registered, so an owner is left holding a failed seal with no coverage. We document the existing unit, and on replacement we register both warranty layers in writing, durations stated, before we leave the property.
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Our CGI Custom Windows & Doors Process

  1. 1
    Call and a real conversation. A live person picks up, and we ask what’s actually happening with the CGI unit: fogging, sticking, leaking, or a full replacement. You’ll get a straight answer on whether it’s a repair or an install before anyone books time.
  2. 2
    Measure every opening twice. Our background-checked, uniformed technicians measure rough opening, frame, and glass on every opening, not just the one you called about. Custom CGI work lives or dies on the measurement, so nothing gets ordered from a guess.
  3. 3
    Parts and series decision, side by side. We write the options on paper: OEM CGI components versus quality aftermarket where CGI no longer carries the part, and the CGI series that actually fits the opening. You see exactly what you’re buying and what it costs.
  4. 4
    The install, done to the wall. We set, shim, and flash the unit so it sits flat and true, because an out-of-true set is what voids a seal and binds a slider. Old materials are hauled away, and the wall is left ready for trim.
  5. 5
    Test in the heat. Every door and window gets cycled, latched, and checked for drainage before we call it finished. If the pane is not true, the job is not done.
  6. 6
    The Keystone Standard close-out. Both manufacturer warranty layers get registered in writing, durations stated, before the truck leaves the driveway. That paperwork is covered by The Keystone Standard and the 90-Day Done Right Promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What CGI Custom Windows & Doors Costs in Henderson

Henderson pricing lands in these ranges for CGI work, and these are the numbers we quote against:

Scenario Typical range
Sealed-unit replacement (fogged fixed lite) $480 – $1,400
Slider repair (rollers, alignment, interlock) $260 – $620
Casement/awning operator and hardware replacement $220 – $540
Custom CGI window, install included $850 – $2,600 per opening
Custom CGI patio or multi-slide door, install included $1,900 – $5,400

What moves the price: series and glass package, the size and count of openings, how far the wall has to be reworked for a true set, and whether the unit is a stock size or a true custom build. Nothing lands on the bill as a surprise; you get the quote in writing and the price holds. Call (833) 842-6670 for your free estimate in Henderson.

Why Henderson Homeowners Call TruePane Windows & Doors Henderson for CGI Work

We’re an independent CGI service provider, not affiliated with or authorized by CGI, and that suits the work just fine: the warranty is registered in writing and the craftsmanship is ours. Every job carries the 90-Day Done Right Promise and The Keystone Standard, so both manufacturer warranty layers are documented with durations stated before we leave. Our technicians have up to 18 years of experience with CGI and a dozen other lines, including PGT, CWS, ES Windows, and ECO Window Systems when CGI doesn’t carry the right part. We’re background-checked and uniformed, we quote manufacturer lines side by side on paper, and most jobs finish in a single visit with no surprise line items. Call (833) 842-6670.

FAQs

Can you repair a CGI window or door, or do I have to replace it? Most CGI problems in Henderson are repairs, not replacements: a fogged sealed unit, worn operator, or binding slider can usually be fixed in a single visit. We diagnose on site and tell you honestly whether a repair holds. Call (833) 842-6670 for a free estimate.

How long does a CGI custom window or door take? Most CGI repair jobs finish in a single visit, and a custom replacement is set on one scheduled day with the sealed unit ordered to your exact specification in the weeks before. Call for a firm timeline on your openings.

Are CGI parts available for an older unit? Often yes, and where CGI no longer makes a part we source a quality aftermarket equivalent and put both options in writing. We won’t substitute quietly. Call (833) 842-6670 to check your series.

Is my existing CGI warranty still valid? Only if both manufacturer warranty layers were registered when it was installed, and many Henderson homes never had it done. We check, and on replacement we register both layers in writing before the truck leaves.

Will the price change once work starts? No. The quote is written, line-item, and fixed before we begin, and the price holds. Call (833) 842-6670 for a free estimate.

Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (833) 842-6670
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - TruePane Windows & Doors Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch