Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Door Installation in Henderson: What to Know First
CWS door installation in Henderson typically runs $1,450 to $4,800 for a standard entry door, depending on the CWS series and whether the frame needs rebuilding. Most single-door jobs are finished in one visit, and we quote manufacturer lines side by side on paper before anything is ordered. We’re an independent CWS service provider, which means you get an honest read on whether your existing door is worth saving and what the replacement actually costs.
This page is for Henderson homeowners who already own CWS doors or windows and want them installed, replaced, or brought back to true. If that’s you, call (833) 842-6670 and a live person will pick up. No forms, no callbacks, no phone tree.
How CWS Products Fail – and How We Fix Them
CWS builds a solid door, but we’ve seen the same handful of problems on Henderson jobs for years. Here’s what goes wrong and what we do about it.
- Bottom-rail water intrusion on entry doors. In Henderson’s dry heat and monsoon-season downpours, the aluminum threshold and the door bottom take a beating. A CWS entry door that wasn’t set with proper sill pan flashing will pull water into the subfloor within a few seasons. We rebuild the sill pan and re-set the door rather than just caulking over the gap.
- Frame racking on French and double doors. Henderson’s expansive soil shifts more than most homeowners realize, and a double door that binds in July but swings free in January is usually racked, not swollen. We re-plumb the frame and check the reveal on both leaves before we touch the hardware.
- Hurricane-rated front door gasket compression. CWS impact and storm doors depend on a continuous gasket seal to meet their rated performance. When the slab sags on its hinges, the gasket stops compressing evenly and the door loses its storm rating without anyone noticing. We check gasket compression on all four sides as part of the install.
- Hinge-side air and dust infiltration on replacement doors. Henderson’s spring winds push fine dust through the smallest gaps. CWS doors installed with the wrong shim stack leave a hairline at the hinge side that you can’t see but can feel. We shim to the frame, not to the rough opening, and verify with a dollar-bill test at every hinge.
- Weatherstripping channel failure on storm and exterior doors. The kerf-mounted weatherstrip on some CWS exterior models works loose after years of heat cycling. We replace it with a quality aftermarket strip matched to the kerf, or order OEM if you want the factory part, and we tell you which makes sense for your door.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CWS Door Installation Process
Every CWS door job follows the same sequence, whether it’s a single entry door or a set of French doors. No step gets skipped.
- 1
Diagnostics on site. We measure the opening twice, check the frame for racking and rot, and confirm whether the existing CWS door can be re-hung or needs replacement. You get a straight answer, not a sales pitch.
- 2
Parts decision. If it’s a hardware or weatherstrip issue, we lay out OEM versus quality aftermarket side by side. Both are on the quote in writing, with the trade-offs spelled out.
- 3
Manufacturer lines quoted on paper. If you’re replacing the door, we quote the CWS-compatible lines we carry – Andersen, Pella, Marvin, Milgard, PGT, CGI, and more – so you can see exactly what you’re buying.
- 4
The install itself. Background-checked, uniformed technicians pull the old door, rebuild the opening if needed, set the new door with proper flashing and shims, and seal it. Most jobs are done in a single visit.
- 5
The test. We open and close the door a dozen times, check the reveal, run the dollar-bill test at every hinge, and verify the lock engages without lifting the door.
- 6
Warranty registration. Before we leave your driveway, we register both manufacturer warranty layers in writing and hand you the paperwork with the durations stated. That’s The Keystone Standard.
See the difference
Before
After
Before
After
Before
AfterWhat CWS Door Installation Costs in Henderson
Here’s what Henderson homeowners actually pay for CWS door work. These are real ranges, not teaser prices.
| Job | Typical Price Range |
|---|---|
| Entry door replacement (CWS-compatible, standard size) | $1,450 – $2,900 |
| Hurricane-rated front or entry door | $2,600 – $4,800 |
| French or double door installation | $3,200 – $6,500 |
| Storm or exterior door replacement | $1,200 – $2,400 |
| Frame rebuild or re-plumb (add-on) | $400 – $1,100 |
What moves the price: door size and series, whether the rough opening needs rebuilding, impact versus non-impact glass, and hardware upgrades. We don’t add surprise line items. Standing offers include $50 off any repair over $250 and 5% off for seniors and veterans. Call (833) 842-6670 for a free estimate – we’ll give you a written quote on the spot.
Why Henderson Homeowners Call TruePane Windows & Doors Henderson for CWS Work
We’ve been doing this work in Henderson long enough that our customers call us back a decade later. Every CWS door job is covered by the 90-Day Done Right Promise: if it’s not done right, we make it right, no paperwork fights, no arguing. A live person answers the phone 24 hours a day, 7 days a week.
Our technicians have up to 18 years of experience and know CWS doors specifically – which series have frame issues, which hardware fails first, and when an OEM part is worth the wait. When CWS parts run long or a door is discontinued, we also service PGT, CGI, ES Windows, and ECO Window Systems, so you’re not stuck. We’re an independent CWS service provider, and we stand behind the work. If the pane is not true, the job is not done.
FAQs
Does TruePane handle CWS warranty claims? No. CWS warranties are between you and CWS. What we do is register both manufacturer warranty layers in writing before we leave your driveway, so the paperwork is in order if you ever need to file. Our own 90-Day Done Right Promise covers our workmanship.
Can you get CWS parts for an older door? Often, yes. Some CWS series have been discontinued, but we can usually match OEM hardware or a quality aftermarket equivalent. We tell you honestly which option makes sense for your door. Call (833) 842-6670 to find out what’s available for your specific model.
Should I repair or replace my CWS door? If the frame is sound and the issue is hardware, weatherstrip, or alignment, we repair. If the slab is warped, the frame is rotted, or the door has lost its storm rating, replacement is usually cheaper over ten years. We’ll show you both numbers on paper.
How fast can you install a CWS door in Henderson? Most standard entry door replacements are scheduled within a week or two of the estimate, and most are finished in a single visit. We’ll tell you the real timeline when we quote, not after you’ve paid a deposit. Call (833) 842-6670 for an estimate.
Do you install CWS doors in older Henderson homes? Yes. A lot of Henderson homes were built with CWS products, and we’ve worked on plenty of them. Older openings often need a frame rebuild or re-plumb, which we quote upfront so there are no surprises.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.