Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Sliding & Patio Doors in Henderson: What to Know First
We repair, replace, and install CWS sliding and patio doors for Henderson homeowners, and most jobs are finished in a single visit once the parts are in hand. CWS-specific parts usually take a few business days to arrive, and we tell you the timeline up front instead of leaving you to guess. Our pricing is set before we start: no surprise line items, no change orders mid-job, and a written quote you can hold us to. This page is for the owner of an existing CWS door who wants it working again, and for the homeowner weighing a repair against a full replacement.
Call (833) 842-6670 and a live person answers, day or night. Estimates are free.
How CWS Products Fail – and How We Fix Them
CWS builds to several different price points, and the failure we find depends on which series is hanging in your wall. Here’s what we actually see on CWS doors around town.
- Rollers flat-spotting on the heavier vinyl sliders. On the larger CWS vinyl sliding panels, the bottom rollers take the full weight of the sash, and after fifteen or twenty years the nylon wheels develop flat spots. The door starts to drag, then jumps the track when you push it. We replace the roller assemblies with matched units rather than forcing the originals back into shape, then re-level the panel so it rolls on the full wheel again.
- Track wear from Henderson’s dust and grit. Our desert air loads the bottom track with fine grit that acts like sandpaper on the rollers and the track channel. It’s the single most common cause of a CWS slider that “used to glide.” We clean and true the track, replace worn rollers, and check the weep holes, because a clogged weep hole is what lets monsoon rain back up into the sill.
- Failed glass seals and fogging on impact-rated units. CWS impact sliding glass doors are common in Henderson because of the windborne-debris requirements on this side of the valley, and when the perimeter seal fails the unit fogs between the panes. You can’t polish that out. We replace the insulated glass unit to the correct impact rating rather than dropping in a standard pane that would quietly void the rating.
- Bent or worn screen door frames and torn mesh. CWS screen doors take a beating from pets and from being slammed against the jamb. A bent frame won’t track, and patching the mesh on a sprung frame just delays the same call. We rebuild the screen with a squared frame and new spline so the door sits flat in its channel.
- Sticking latches and misaligned French patio configurations. On CWS impact French patio doors, the active leaf’s multipoint latch starts to bind when the frame shifts a fraction over the seasons. Homeowners often force it, which wears the keeper. We re-square the frame, adjust the keepers, and confirm the latch throws cleanly before we call it done.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CWS Sliding & Patio Doors Process
A CWS job runs the same way every time, because the details are where doors get done right or done twice.
- 1
Diagnose on site. We measure the opening twice, check the rollers, track, glass seal, and frame square, and identify the exact CWS series so we order the right parts.
- 2
Decide OEM versus aftermarket, on paper. Where an OEM CWS part is the right call we say so; where a quality aftermarket roller or glass unit does the same job for less, we show you both side by side and let you choose.
- 3
Quote it plainly. Upfront pricing in writing before any work starts, so the number on the bill matches the number you agreed to.
- 4
Do the repair. Rollers, track, glass, screen, or latch, set and adjusted to the opening, not just swapped in.
- 5
Test it like you’ll use it. We open and close the door through its full travel, check the latch and the weep drainage, and make sure it doesn’t bind.
- 6
Leave it clean and covered. We register both manufacturer warranty layers in writing before we leave, under The Keystone Standard, and back the work with our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat CWS Sliding & Patio Doors Costs in Henderson
Prices depend on the series, the part, and whether the glass is impact-rated. Here’s the honest range for the jobs we run most.
- Roller and track service: $150 – $350 per door, most common CWS repair.
- Insulated glass unit replacement (standard): $250 – $550, depending on size.
- Impact-rated glass replacement: $400 – $900, because the rating has to be matched, not approximated.
- Screen door rebuild or new screen door: $120 – $350.
- Latch and keeper adjustment on French patio doors: $120 – $280.
- Full sliding glass door replacement: $1,400 – $3,800 installed, moving with size, series, and impact rating.
What moves the price: impact vs standard glass, the CWS series and its part availability, and whether the frame needs re-squaring. Most jobs qualify for our $50 Off Any Repair Over $250, and seniors and veterans get a permanent 5% discount. Call (833) 842-6670 for a free, written estimate.
Why Henderson Homeowners Call TruePane Windows & Doors Henderson for CWS Work
We’re not the cheapest bid in the room, and we don’t try to be. What we put in writing is what carries the job: The Keystone Standard means both manufacturer warranty layers are registered in writing before we leave, with the durations stated, so a CWS door that fails later doesn’t turn into a paperwork fight. The 90-Day Done Right Promise means if it isn’t right, we make it right. A live person answers the phone 24/7, and our background-checked, uniformed technicians measure every opening twice. We’re an independent CWS service provider and an authorized installer for more than a dozen lines, so if a CWS part is discontinued or a full replacement makes more sense, we can quote PGT, CGI, ES Windows, and ECO Window Systems right alongside it. And we’ve proudly served local communities for over 42 years, which is why we plan to still be here when you call back.
FAQs
Yes, when the repair is done to the correct spec, and that’s exactly what we’re careful about. Using a standard pane in an impact-rated CWS door, for example, can void the rating, so we match the glass to the original rating. We also register both warranty layers in writing before we leave so there’s no argument later. Call (833) 842-6670 with your model info and we’ll confirm what your door needs.
Most CWS parts aren’t sitting on every shelf, so we order them and give you a real timeline instead of a guess, often a few business days. Because we install multiple manufacturer lines, we can also offer a quality aftermarket roller or glass unit where it’s the smarter buy, quoted next to the OEM option on paper. Call (833) 842-6670 and we’ll tell you what your specific door needs.
Repair is usually the right call when the frame and glass are sound and the problem is rollers, track, screen, or latch. Replacement makes more sense when the frame is warped, the glass seal has failed in a way that keeps recurring, or the door no longer meets impact requirements. We’ll give you both numbers in writing so the choice is yours. Call (833) 842-6670 for a free estimate.
We schedule promptly and show up when we say we will, though the exact timing depends on parts for your specific CWS series. A live person answers the phone around the clock, so you’re never stuck leaving a message. Call (833) 842-6670 to get on the schedule.
Yes. Under The Keystone Standard, both manufacturer warranty layers are registered in writing, with durations stated, before our technician leaves your driveway. That’s part of every job, not an add-on. Call (833) 842-6670 to schedule your free estimate.
If a CWS sliding or patio door in your Henderson home is dragging, fogging, or won’t latch, call (833) 842-6670 today. A live person will pick up, we’ll set a time that works for you, and you’ll get a free estimate in writing before any work begins. We’ll be there when we say, and if the pane is not true, the job is not done.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.