A TruePane company - serving Henderson, NV
C

CWS Custom Windows & Doors in Henderson, NV

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CWS Custom Windows & Doors in Henderson: What to Know First

We provide independent CWS custom windows and door service across Henderson, and most jobs are measured, quoted, and finished in a single visit once the manufacturer parts land. Turnaround runs about one to three weeks for custom configurations that need factory-order sashes or door slabs, and a few days for hardware and seal work. On price, expect a straight, written line-item quote up front: custom CWS window replacement in Henderson generally runs $650 to $1,900 per opening, and a custom entry or patio door runs $1,400 to $4,200 installed.

Call (833) 842-6670

This page is for Henderson homeowners who already own CWS windows or doors and want them serviced or reordered by people who know the product line. As an independent CWS service provider, we’re not affiliated with or authorized by CWS, and we don’t pretend otherwise. We work on the product, not for the brand. Call (833) 842-6670 and a live person answers, day or night.

How CWS Products Fail – and How We Fix Them

CWS builds to a range of specifications depending on the series, and the failures we see in Henderson homes tend to cluster around how those units handle desert heat and the dust that comes with it. Here’s what shows up on our diagnostic list.

  • Fogged insulated glass on CWS vinyl and aluminum units. The most common call we get. A failed perimeter seal lets our dry air pull moisture between the panes, so the glass hazes from the edge inward. The cause is almost always a seal that gave out after years of afternoon sun on a south- or west-facing wall. We replace the insulated glass unit rather than the whole window, which keeps the cost down and the frame intact.
  • Binding patio and sliding doors. CWS sliders often start dragging at the bottom track. It’s usually a worn roller assembly or a track packed with the fine caliche dust that blows through the valley, not a failed frame. We replace the rollers, clean and re-set the track, and adjust the door so it latches with a light pull.
  • Failed weatherstripping and sweeps on entry doors. CWS entry doors use sweep and bulb seals that harden and shrink in our dry heat. Once the seal is gone, dust and hot air come in under the door. We swap the sweep, check the threshold, and confirm the door still swings true after the new seal is seated.
  • Hardware that’s been out of production. Some older CWS series use handles, locks, and hinges that are no longer stocked. We’ll tell you straight whether an OEM part is findable or whether a quality aftermarket replacement is the better call, and we quote both on paper so you can see it side by side.
  • Seal failures that voided a warranty because they weren’t documented. When a CWS unit is repaired without recording the original spec and the manufacturer’s warranty layers, coverage for the next failure is at risk. Our fix includes registering both warranty layers in writing before we leave, so the next issue isn’t a paperwork fight.
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Our CWS Custom Windows & Doors Process

Every CWS job follows the same path from the first call to the last wipe-down, and we measure each opening twice before anything gets ordered.

  1. 1
    Diagnostics on site. We test the glass seal, check the operable hardware, and inspect the frame and track for what actually failed, not what looks like it failed.
  2. 2
    The parts decision. If an OEM CWS part is available and right, we order it. If it’s discontinued or overpriced for what it is, we lay a quality aftermarket option next to it on paper and let you choose.
  3. 3
    Side-by-side quoting. Where a full custom replacement makes more sense than a repair, we quote the manufacturer lines we install on paper so you see exactly what you’re buying. We’re an authorized installer for lines that include Andersen, Pella, Marvin, Milgard, PGT, and CGI.
  4. 4
    The work. Background-checked, uniformed technicians set the unit, seal it, and check it against the opening before calling it done.
  5. 5
    The test. We open, close, latch, and water-check every operable unit. If the pane is not true, the job is not done.
  6. 6
    The guarantee and the cleanup. Both manufacturer warranty layers are registered in writing before we leave, and the site is swept clean. The 90-Day Done Right Promise covers the workmanship.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What CWS Custom Windows & Doors Costs in Henderson

Here’s what Henderson homeowners typically see for CWS work, in real ranges. Every quote is free, upfront, and in writing, with no surprise line items on the bill.

Job Typical Range
Insulated glass unit replacement (per unit) $220 – $520
Patio/slider roller and track service $180 – $380
Entry door hardware, sweep, and seal $160 – $340
Custom CWS window replacement (per opening, installed) $650 – $1,900
Custom CWS entry or patio door (installed) $1,400 – $4,200

What moves the price: glass size and coating, whether the unit needs a factory order, and how many openings you’re doing at once. Multiple units on one visit usually costs less per opening. Call (833) 842-6670 to schedule your free estimate and get an exact number.

Why Henderson Homeowners Call TruePane Windows & Doors Henderson for CWS Work

We’re a Henderson company, and the reason people call us back for CWS work is simple: we put it in writing and we show up when we say. Every job carries the 90-Day Done Right Promise and The Keystone Standard, both warranty layers registered on paper with durations stated before we leave the driveway. Our technicians have up to 18 years of experience, and they know how a CWS unit is built and where it’s prone to fail in this climate.

If you own other brands, we service those too. We handle PGT, CGI, ES Windows, and ECO Window Systems alongside CWS, so one call covers the whole house. Standing offers apply: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. When you’re ready to price the job, call us and we’ll give you a square deal.

FAQs

Will servicing my CWS windows void the warranty? Not if the work is done to spec and the repair is documented. Our practice is to register both manufacturer warranty layers in writing and state the durations before we leave, so the coverage is clear and recorded. Call (833) 842-6670 with your CWS model and we’ll tell you where you stand.

Can you still get parts for an older CWS series? Often yes, and when an OEM part is discontinued we’ll quote a quality aftermarket replacement beside it on paper. We’re an independent CWS service provider, so we’re honest about what’s findable and what isn’t. Call (833) 842-6670 and we’ll check your model.

Should I repair my CWS window or replace it? A failed glass seal or worn roller is usually worth repairing; a frame that’s warped or a unit that’s failing at the corners often points to replacement. We diagnose on site and quote both so you decide with real numbers. Call (833) 842-6670 for a free estimate.

How fast can you get out to a Henderson home? For hardware, seal, and roller work, we often finish in a single visit; custom glass or a factory-ordered door usually takes one to three weeks to arrive and install. We’ll give you a real timeline up front. Call (833) 842-6670 and a live person answers, 24/7.

Do you work on other window brands too? Yes. Alongside CWS we service PGT, CGI, ES Windows, ECO Window Systems, and the manufacturer lines we install. Call (833) 842-6670 to schedule your free estimate.

Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (833) 842-6670
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - TruePane Windows & Doors Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch