Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Custom Windows & Doors in Henderson: What to Know First
TruePane Windows & Doors Henderson provides independent Therma-Tru custom windows and door service in Henderson, from single-door hinge and sill work to full custom entry systems. Most Therma-Tru repairs and adjustments are completed in a single visit, and custom orders typically take three to six weeks depending on the line and finish. We give you a written, line-item price before anything is ordered or cut, and we hold to it. If the pane is not true, the job is not done.
This page is for Henderson homeowners who already own a Therma-Tru product, are staying in their house, and want the work done once, correctly. Call (833) 842-6670 and a live person will pick up, days, nights, and weekends.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds a good door. What we see in Henderson is not product failure so much as the intersection of desert heat, hard water, and time. Here are the five we run into most.
- Fiber-Classic and Smooth-Star slab edges swelling at the bottom rail. The composite slab itself holds up, but the bottom rail and the sill interface collect irrigation overspray and monsoon splash, and the paint film at the very bottom edge gets neglected. Once moisture wicks in behind the finish, the door starts to bind in July and drag on the threshold. We pull the slab, inspect the bottom rail and sill pan, reset or replace the sill, and refinish the edge properly.
- Benchmark and Fiber-Classic hinges binding after ten-plus years. Therma-Tru entry doors are heavy, and hinge screws work loose in the jamb over years of daily use and thermal cycling. A door that “sticks” in summer is often a hinge-plate problem, not a slab problem. We reset the hinges into sound jamb material rather than driving longer screws into a split.
- Doorlite and sidelite seals shrinking. The glazing seal around Therma-Tru doorlites and sidelites dries out under Henderson’s UV load faster than in milder climates. That shows up as fogging between the panes or a faint rattle in wind. We reseal or replace the doorlite unit with a correctly sized OEM or matched aftermarket lite, not a generic cut-down glass.
- Threshold and sweep wear on Smooth-Star patio and entry doors. The adjustable threshold and door sweep take the most abuse of any part on the door. When the sweep wears, wind-driven dust and summer heat pour in. We set the threshold height to the slab and fit a fresh sweep.
- Finish checking on painted Fiber-Classic slabs facing west. A west-facing door in Henderson bakes. Paint film that is thin or chalked lets the composite take UV directly, and you get checking and hairline cracks at the panel edges. We prep, prime, and repaint to spec. A proper finish coat is part of the repair, not an add-on.
One detail worth knowing: Therma-Tru part numbers are tied to the door series and the handing, so a “same size” slab or sweep from a big-box shelf often will not fit without modification, and using it can affect your warranty. We confirm the series and handing before we order anything.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Custom Windows & Doors Process
- 1
Call and describe it. A live person answers (833) 842-6670 any hour. Tell us the door line if you know it, or send a photo of the label on the door edge.
- 2
Measure and diagnose. A background-checked, uniformed technician measures every opening twice, checks the slab, jamb, sill, and hinges, and tells you what is actually wrong.
- 3
Parts decision on paper. We quote OEM Therma-Tru parts and quality aftermarket where it makes sense, side by side, so you see the trade-off in price and warranty effect before you choose.
- 4
The work. Most repairs are done in one visit. Custom orders are scheduled once the door or lite arrives and inspected on delivery.
- 5
The test. We open, close, latch, and check for daylight and air leaks with the door in place. If it does not swing true, we are not finished.
- 6
The guarantee and the paperwork. Under The Keystone Standard, both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. The 90-Day Done Right Promise covers the workmanship.
What Therma-Tru Custom Windows & Doors Costs in Henderson
These are typical ranges for Therma-Tru work in the Henderson market. Your written estimate is the real number, and it does not change once work starts.
| Job | Typical range |
|---|---|
| Adjust hinges, strike, and threshold (single entry door) | $150 – $300 |
| Replace door sweep and reset threshold | $120 – $250 |
| Reseal or replace a doorlite or sidelite unit | $250 – $550 |
| Repaint and refinish a Fiber-Classic slab edge or face | $300 – $650 |
| Custom Therma-Tru entry door, ordered and installed | $2,400 – $6,500+ |
What moves the price: the door series, whether the slab is composite or steel, glass options, custom sizing, and whether the sill or framing needs repair behind the door. Call (833) 842-6670 to schedule your free estimate. Estimates are free, and we quote manufacturer lines side by side on paper.
See the difference
Before
After
Before
After
Before
AfterWhy Henderson Homeowners Call TruePane Windows & Doors Henderson for Therma-Tru Work
We are not Therma-Tru, and we do not claim to be authorized by them. We are an independent Therma-Tru service provider, and we are also an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, and PGT. That matters when a Therma-Tru door has reached the end of its life: we can show you a replacement from the same brand or from PGT, CGI, CWS, or ES Windows, side by side, without steering you toward whatever we happen to stock.
Our technicians have up to 18 years of experience, and they are background-checked and uniformed on every job. Every Therma-Tru job we do is covered by the 90-Day Done Right Promise. If it is not done right, we make it right, with no paperwork fight. A live person answers the phone 24 hours a day, 7 days a week. That is the difference between a company that plans to be in Henderson in thirty years and one that does not.
FAQs
Only if the wrong parts or methods are used. Therma-Tru’s warranty covers the door and components, and using non-specified parts or improper installation can void a claim. We note the series and handing, use OEM or properly matched parts, and register both warranty layers in writing before we leave. Call (833) 842-6670 if you are unsure whether your door is still covered.
Most common parts, sweeps, hinges, and doorlites, we can source quickly. A custom slab or a specific sidelite configuration is ordered to the series and handing and typically takes a few weeks. Call (833) 842-6670 with your door label and we will tell you what is in stock and what has to be ordered.
Repair is usually the right call on a door under about fifteen years old with a sound slab and frame. Replace when the slab is cracked, the frame is rotted at the sill, or you want a different glass or finish. We price both on paper so the decision is yours. Call (833) 842-6670 for a free estimate.
Most hinge, strike, and threshold problems are fixed in one visit, and we schedule promptly. A door that will not latch is a security and heat problem in Henderson, so we treat it as a priority. Call (833) 842-6670.
Yes. We service Therma-Tru doors installed by anyone. We measure every opening twice and quote before we touch it, so you know the price up front. Call (833) 842-6670 to schedule.
Get Your Free Therma-Tru Estimate
Call (833) 842-6670 for a free estimate on your Therma-Tru custom windows and doors in Henderson. A live person answers any hour, we measure twice, and we put the price in writing. The Keystone Standard and the 90-Day Done Right Promise come with every job. Seniors and veterans get a permanent 5% discount, and we take $50 off any repair over $250.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.