A TruePane company - serving Henderson, NV

French & Double Doors in Henderson, NV

Double hungDouble hung
Single hungSingle hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

French & Double Doors in Henderson, NV

French and double doors are two hinged door leaves that meet in the middle of an opening, usually glazed with divided lites and swung inward into a living room, dining room, or patio. Homeowners in Henderson call us for them when a single door feels cramped, when a back wall needs more daylight, or when an old set has gone out of true and no longer seals. We install both swinging French configurations and the wider double-door setups that open a whole wall to a courtyard, and we quote manufacturer lines side by side on paper so you can see exactly what you’re buying before anyone orders anything.

This page covers the sub-service of Door Installation in Henderson that deals specifically with paired leaves, sidelites, and the trim and hardware that make them work. If you’d rather start with the parent service and work down to French and double doors from there, that page is the place to begin. Either way, a live person answers the phone at (833) 842-6670, twenty-four hours a day, seven days a week.

TruePane Windows & Doors Henderson is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, and our technicians have up to 18 years of experience setting paired doors straight, plumb, and square. We measure every opening twice. We register both warranty layers in writing before we leave. That is The Keystone Standard, and it’s why we’re the last call most of our customers make on a door.

Key Takeaways

  • French and double doors cost more to install than a single door because both leaves have to be set plumb and the meeting stile has to line up to within a hair.
  • Henderson’s summer heat and the monsoon swings in July and August punish a door that isn’t hung true, so sealing and hardware matter as much as the door itself.
  • Every install is covered by the 90-Day Done Right Promise and both warranty layers registered in writing.
  • Most jobs are completed in one visit. We quote upfront, on paper, with no surprise line items.
  • Call (833) 842-6670 for a free estimate. A live person picks up, day or night.

When You Need French & Double Doors

French and double doors are a bigger commitment than a single entry door, and most homeowners who call us have lived with a problem long enough to know exactly what’s wrong. Here are the scenarios we hear most in Henderson:

  • The leaves no longer meet. A gap opens at the meeting stile and you can see daylight or feel hot air in July. Pair doors drift out of alignment as a house settles, and Henderson’s expansive clay soils move more than most people expect. Once the gap shows, the weatherstripping has usually given up too.
  • The door binds in summer. Wooden leaves swell in the heat and humidity and drag on the threshold from June through September. If you’ve been shaving the door every year to make it close, the frame is probably out of square and the door needs to come out and go back in true.
  • You want more light into a dark room. A double door with glazed leaves opens a wall that a solid door closes off. We see this a lot in Henderson homes where a dining room or family room faces a courtyard and only has one narrow door.
  • The old set is single-pane and leaking air. Older French doors in Henderson’s established neighborhoods often have single-pane glass and worn-out weatherstripping. The seals fail at the hinge side first, and you notice it as a cold spot in winter or a hot spot near the handle.
  • The patio opening needs to be wider. A single patio door feels narrow when you’re carrying furniture or a tray of food outside. A double set or a pair with sidelites gives you the width without adding a slider.
  • The hardware has failed. Multipoint locks, flush bolts, and the astragal on the inactive leaf are all points of wear. When one fails, the other leaf often stops latching properly, and the door stops holding closed.

If any of these sound familiar, don’t wait for the gap to get worse. We can look at it, tell you what’s actually wrong, and give you a straight price. Call (833) 842-6670.

Our French & Double Doors Process

Paired doors are less forgiving than single doors. Both leaves have to be set plumb, the head and sill have to be level, and the meeting stile has to line up to within a hair or the door will never seal. Here’s how we work through a French or double-door install in Henderson:

  1. We measure the opening twice. Once at the rough opening and once at the finished opening. This is where most installs go wrong, so we double-check before anything is ordered. If the existing frame is out of square, we tell you now rather than after the door is on the ground.
  2. We quote manufacturer lines side by side, on paper. You’ll see PGT, CGI, CWS, and ES Windows options next to each other, with the warranty durations written out. No pressure to pick one, no hidden line items. You decide, and we order what you choose.
  3. We remove the old set and inspect the frame. Rot at the sill, water damage at the threshold, or a settled header can all show up once the old door is out. If we find something, we show you and price it before we go further.
  4. We set the new doors plumb and square. Shims, fasteners, and a level check on both leaves. Then we check the meeting stile and adjust the hinges and strike plates so both leaves close on the same plane.
  5. We seal, weatherstrip, and finish. Threshold, sill pan, perimeter sealant, and weatherstripping at the meeting stile. Multipoint hardware gets tested on both leaves. Nothing gets left loose.
  6. We register both warranty layers in writing before we leave. The manufacturer warranty and our own coverage, with durations stated. You get the paperwork in your hands, not in a portal you have to chase.

Every job is backed by the 90-Day Done Right Promise. If something isn’t done right, we make it right. No paperwork fights, no arguing over fine print.

French & Double Doors Pricing in Henderson

French and double doors cost more to install than a single door because there are two leaves to hang, two hinge sets to align, and a meeting stile that has to close tight against weatherstripping. Here’s a realistic range for Henderson, based on what we actually quote:

Item Typical Range
Basic double-door install (labor, standard hardware) $650 – $1,200
French door install with divided lites, per pair $900 – $1,800
Prehung double-door unit, per leaf $500 – $1,400
Custom pair with sidelites or transom $2,500 – $6,000+
Multipoint or upgraded hardware $180 – $450
Threshold, sill pan, and weatherstripping $120 – $300

What moves the price: the material (fiberglass and steel hold up better in Henderson’s heat than wood, which swells and shrinks through the year), the size of the opening, whether the existing frame is reusable, and whether the hardware is basic or multipoint. A courtyard-facing pair in a Green Valley home with a settled header will cost more than a straight swap on a flat wall, and we’ll tell you that before you commit.

We quote manufacturer lines side by side on paper so you can see the difference between a PGT pair and a CGI pair in black and white. No-hassle, upfront pricing, and most jobs completed in a single visit. Standing offers: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.

Call (833) 842-6670 for a free estimate. Estimates are free, and we’ll tell you honestly whether a repair will hold or whether the door needs to come out.

FAQs – French & Double Doors

How much does it cost to install French doors in Henderson?

French door installation in Henderson typically runs $900 to $1,800 per pair for labor and standard hardware, and $2,500 to $6,000+ for a custom pair with sidelites or a transom. The price depends on the door material, the size of the opening, whether the existing frame can be reused, and whether the hardware is basic or multipoint. Call (833) 842-6670 for an exact quote. Estimates are free.

Can you install French or double doors in a single visit?

Yes, most French and double-door installs are completed in a single visit. We measure the opening twice before the job, order the door in advance, and arrive prepared with the hardware and sealing materials on hand. If we find hidden rot or a settled header once the old door is out, we show you and price the fix before we continue, rather than leaving the opening unfinished for a second appointment. Call (833) 842-6670 to schedule.

Is it cheaper to repair or replace French doors in Henderson?

Repair is cheaper when the frame is sound and only the hardware or weatherstripping has failed, and replacement is cheaper over the long run when the frame is out of square, the glass is single-pane and leaking, or the leaves have warped past the point of adjustment. A misaligned pair can often be re-hung and re-shimmed for far less than a new set. Once the frame is out of square, though, you’re paying to fix it every year. Call (833) 842-6670 and we’ll tell you which side of that line your door is on.

Do French or double doors hold up in Henderson’s heat?

They hold up well if the material and the seal are right. Henderson’s summer heat and the monsoon swings in July and August are hard on wood doors and on any door that isn’t hung plumb. Fiberglass and steel-clad doors handle the temperature swings better than wood, and a proper sill pan and perimeter sealant keep the frame from taking on water. Our technicians have up to 18 years of experience setting paired doors in this climate, and we register both warranty layers in writing before we leave. Call (833) 842-6670 for a free estimate.

If your French or double doors are sticking, leaking, or simply not doing their job, call us at (833) 842-6670. A live person answers twenty-four hours a day, seven days a week, and we’ll give you a free estimate and a straight answer about whether to repair or replace. TruePane Windows & Doors Henderson has proudly served local communities for over 42 years through a heritage of craft and community commitment, and we plan to be here for a long time yet. For a look at the broader work we do on doors across Henderson, start with our home page or call today.

Written by the team at TruePane Windows & Doors Henderson, serving Henderson.

Need Windows & Doors help in Henderson? Licensed & insured · free written estimates
Call (833) 842-6670
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - TruePane Windows & Doors Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch