Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
See the difference
Before
After
Before
After
Before
AfterAwning windows are hinged at the top and crank out from the bottom; hopper windows are hinged at the bottom and tilt in from the top. In Henderson, we install both most often in bathrooms, above kitchen counters, in laundry rooms, and anywhere a standard slider wastes wall space or puts a window where someone would walk into it. TruePane Windows & Doors Henderson handles awning and hopper replacements as part of our window installation work, and we’ve been doing it long enough to know that a small operating window is only as good as the frame it sits in.
If you have a crank window that sticks halfway open, a hopper vent in a bathroom that no longer seals, or an older home where the original aluminum awning units have given up, call us at (833) 842-6670. A live person answers around the clock, and estimates are free.
Awning and hopper windows are the ones homeowners think about least and notice most when they fail. The crank handle spins freely but the sash won’t move. Rain comes in at the top corner you can’t quite reach. The bathroom stays steamy no matter how long you run the fan. In a Henderson summer, where late-afternoon sun hits west-facing walls hard from May through September, an operating window that actually opens and shuts correctly is worth more than the square footage it takes up.
When You Need Awning & Hopper Windows
- The crank turns but the sash doesn’t move. On older aluminum awning units common in mid-century Henderson neighborhoods, the operator arm or the hinge hardware wears out first. You can hear the mechanism moving but the window stays put, or it pops open an inch and jams.
- Water shows up on the sill after a monsoon storm. Henderson gets sudden summer rain that drives sideways. A hopper window in a laundry or bathroom with a worn gasket or a sagged hinge will let water past the seal, and you’ll find it on the interior sill hours later.
- The bathroom or laundry room never dries out. A hopper window that won’t open properly cuts off the only cross-ventilation some interior rooms have. If the exhaust fan isn’t keeping up, the window needs to work.
- You’re replacing windows above a kitchen counter or tub. Awning windows open outward from the bottom, so they don’t swing into the sink, the countertop, or the shower. That’s the practical reason they show up in those spots, and it’s why we recommend them there.
- An addition or remodel needs a small operable window. Awning and hopper styles work in tight wall sections where a slider won’t fit and a fixed pane leaves a room without ventilation.
- The frame around a small window has rotted or pulled loose. Small windows take a beating because they’re often on exterior walls with the most weather exposure. Once the frame gives, the window is no longer sealing regardless of the glass.
We see a fair number of these calls in older Henderson pockets like Downtown Henderson and the neighborhoods off Boulder Highway, where original single-pane units have outlasted their hardware by a decade or more. When we come out, we look at the frame first, because a new sash in a failing frame is a waste of your money.
Our Awning & Hopper Windows Process
- We measure the opening twice. Small windows leave no room for error. Our technicians measure the rough opening and the existing frame, then confirm the numbers before anything is ordered. A quarter inch off on a bathroom hopper shows up as a draft you’ll feel for years.
- We quote manufacturer lines side by side, on paper. Awning and hopper windows are available from several lines we’re authorized to install, including PGT and CGI. You’ll see the options, the glass packages, and what each costs, and you decide before we order. No line items appear later that weren’t on the page.
- We show up when we say, uniformed and background-checked. Most small-window jobs are done in a single visit. We protect the floor and the surrounding trim, pull the old unit, and check the opening for rot or water damage before the new window goes in.
- We set the window true and check the operation. The sash has to open and close smoothly and the seal has to sit flush all the way around. Our founding rule is simple: if the pane is not true, the job is not done. That applies just as much to a two-foot bathroom hopper as to a full wall of glass.
- We register both warranty layers in writing before we leave. Under The Keystone Standard, you get both manufacturer warranty registrations confirmed, with the durations written down, plus our 90-Day Done Right Promise on the workmanship. If something isn’t right in the first 90 days, we make it right, no arguing.
Our technicians have up to 18 years of experience, and we hire and train locally, so the person setting your window is likely to be the same person who answers when you call back.
Awning & Hopper Windows Pricing in Henderson
Awning and hopper windows are among the smaller openings on a house, so the window itself usually costs less than a large picture unit. The labor and the frame work are where the range opens up. Here’s what Henderson homeowners typically see for a single replacement, installed, in the current market:
| Item | Typical installed range |
|---|---|
| Standard awning window, vinyl, single unit | $450 to $850 |
| Standard hopper window, vinyl, single unit | $400 to $750 |
| Aluminum or clad unit, single | $700 to $1,200 |
| Frame repair or rebuild before install | $150 to $500, depending on damage |
| Glass upgrade (low-E, impact-rated) | $100 to $350 added per unit |
| Multiple small windows, per unit average | $350 to $650 when done together |
What moves the number: whether the frame is sound or needs rebuilding, whether you choose a standard glass package or an upgrade, and how many units go in at once. Awning and hopper windows are usually clustered (a bathroom vent, a kitchen counter window, a laundry room), and pricing several together often brings the per-unit cost down because the setup work is shared.
Impact-rated glass is worth asking about in Henderson specifically. Hail and wind-driven rain come with the summer storms, and impact glazing adds a layer of protection small vent windows otherwise don’t have. We’ll quote both options side by side so you can weigh it.
We give free estimates and stand behind upfront pricing: the number on the quote is the number on the bill. If we find unexpected rot once the old unit is out, we tell you before we do the work, not after. We also offer $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
For larger projects that combine small operable windows with bigger replacements, or if you want the full picture on styles and options, our home page is a good place to start, and our main Window Installation in Henderson page covers the whole range.
FAQs – Awning & Hopper Windows
What’s the difference between an awning window and a hopper window?
An awning window is hinged at the top and cranks open from the bottom, so it pushes outward and keeps rain off the opening; a hopper window is hinged at the bottom and tilts open at the top, so it brings air in low. Awnings are common above countertops and sinks because they open away from the space; hoppers are common in bathrooms and basements because they can sit high on the wall. Both are operating windows, and both need the same careful setting to seal correctly in Henderson’s heat. Call (833) 842-6670 and we’ll tell you which fits your opening.
Can you fix a stuck awning or hopper window instead of replacing it?
Often yes, and we’ll tell you honestly when a repair is the better call. If the sash and frame are sound and only the operator arm, crank, or hinge hardware has failed, repairing makes sense. If the frame is warped, the glass seal has failed, or water has gotten into the wall, replacement is the more economical path. Our technicians inspect the frame before recommending either. Call (833) 842-6670 for a free look; estimates are free and we don’t push a replacement you don’t need.
Do awning and hopper windows work well in Henderson’s climate?
They do, with the right glass and the right install. Henderson’s heat and sun are hard on window seals, and small windows concentrate the stress on a short frame. We recommend low-E glass for west- and south-facing units and impact-rated glass where hail is a concern. Setting the frame true matters more than the glass package, which is why we measure twice. Call (833) 842-6670 to talk through options for your specific walls.
Is it cheaper to repair or replace an awning or hopper window?
Repair is usually cheaper when the frame is solid and only the hardware has failed, often a fraction of the cost of a full replacement. Replace when the frame has rotted, the glass seal has failed, or the opening no longer seals. On a small window, the labor to rebuild a bad frame can approach the cost of a new unit, so the honest answer depends on what we find when we open it up. Call (833) 842-6670 for a free estimate and a straight answer either way.
Awning and hopper windows are a small part of the house and a large part of how a room feels. Done right, they open when you want them to and shut tight when you don’t, and the hardware holds up through a decade of Henderson summers. That’s the standard we hold ourselves to on every job, from a single bathroom hopper to a full set of matched windows. If you have a window that won’t crank, a seal that’s letting water in, or a project that needs small operable windows done properly, call TruePane Windows & Doors Henderson at (833) 842-6670 for a free estimate. A live person answers 24 hours a day, and we’ll be there when we say.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson.