Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Impact Garage Doors: The Henderson Owner’s Guide
We install and service Mr-Glass-compatible impact garage doors for Henderson homeowners, and most full door replacements run $2,400 to $6,800 installed depending on size, glazing, and hardware. A single failed panel or hardware part can often be swapped in a few hours, and we schedule most Henderson service calls within a few business days rather than weeks. Owners usually find us after the door stops sealing in our summer heat – a gap along the bottom, a rattle in the track, or a pane that spidered in a hailstorm – and they want the part matched to their exact Mr-Glass unit, priced on paper, and installed right the first time.
Which Mr-Glass Models This Applies To
Mr-Glass builds impact-rated garage doors and panel systems for Florida and Nevada wind zones, and the part numbers differ across the product families. The most common residential lines are the aluminum full-view and framed impact doors, plus the panel-style impact doors with laminated or polycarbonate glazing. Before we quote anything, we read the specification label on the inside of the door frame – it lists the model, wind-load rating, and glazing type. Miss that step and you’ll order a replacement panel that’s half an inch off, or a hinge set drilled for a different stile spacing.
The OEM-versus-aftermarket decision matters here. Mr-Glass factory parts match the original tolerances exactly, and for a wind-rated door that matters because the impact rating depends on the whole assembly. Quality aftermarket equivalents – the right gauge stainless hinge, a matched track bracket – work fine for wear items, and we quote both side by side on paper so a Henderson homeowner sees exactly what they’re buying and what the difference costs. TruePane Windows & Doors Henderson is an independent service provider and is not affiliated with Mr-Glass. We also service PGT, CGI, and CWS impact doors.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Mr-Glass Impact Garage Doors Is Failing
- The door binds or rubs in July. Henderson’s summer heat expands the aluminum track and stiles, and a marginal roller or worn hinge shows up as a scrape on one side. Left alone, it wears the track edge and the panel edge together.
- A pane has a spider crack or a milky haze. Laminated impact glazing holds together after a hit – that’s the point – but a hail strike or a stray ball can cloud the interlayer. Once it fogs, the panel’s wind rating is compromised and the whole assembly should be evaluated.
- The bottom seal leaves daylight. The weather seal and bottom astragal take the brunt of our dry heat and UV. When it hardens and shrinks, dust and heat walk right in, and the door no longer seats against the threshold.
- Rollers, hinges, or cables rattle or grind. On a hollow, rumbling door those parts have worn past their service life. This is normal wear, but it loads the opener and the track harder with every cycle.
- The opener strains or reverses on its own. A door that’s out of balance fights the motor. The opener is usually the messenger, not the cause – the balance or a binding part is failing upstream.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full impact door replacement in Henderson typically lands between $2,400 and $6,800 installed, with full-view aluminum and larger custom sizes at the top of that range. If you’re repairing rather than replacing:
- Impact glazing panel (per panel): $280 to $900, depending on size and glazing type.
- Roller and hinge set: $140 to $320 installed.
- Bottom weather seal and astragal: $110 to $240 installed.
- Track section or bracket repair: $180 to $450, depending on the section.
Every quote is line-itemed on paper with parts and labor separated – no surprise line items when the bill arrives. Work is covered by our 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway.
DIY or Call Us?
You can safely check a few things yourself: wipe the bottom seal and look for daylight, listen for a grind when the door cycles, and read the spec label inside the frame. What you should not touch is the torsion spring, the cables, or the track under load. Those parts are under extreme tension, and a failed spring or a cable that slips can cause serious injury in a heartbeat – this is not a job for a homeowner with a pair of gloves and a YouTube video. Balance adjustments, track realignment, and any glazing swap belong to a trained technician, especially on a wind-rated door where a bad install voids the rating.
Our technicians have up to 18 years of experience, they’re background-checked and uniformed, and they measure every opening twice before quoting. Call (833) 842-6670 and we’ll walk you through what’s failing and what it costs – estimates are free, and a live person answers around the clock.
FAQs
Rollers and hinges typically hold six to ten years, the bottom weather seal three to five in our UV and heat, and impact glazing is built to endure the life of the door unless it takes a direct strike. Dry Henderson air and intense summer sun age rubber and seals faster than coastal climates, so we see seal failures earlier than many owners expect.
Often yes. A worn seal, a single fogged panel, or a set of rollers can be replaced without touching the structure of the door. We inspect first and only recommend a full replacement when the glazing or panel integrity is compromised – on a wind-rated door that’s a safety decision, not an upsell. Call (833) 842-6670 and we’ll tell you honestly which way it goes.
Most single-part repairs finish in one visit, usually two to four hours, and most full door installations we complete in a single day. We arrive with the part matched to your model, we test the door’s balance and seal before we leave, and we don’t book a second appointment to finish what should have been done the first time.
We read the model and wind-load label inside your door frame, then order parts that match that spec – OEM or a qualified equivalent, quoted side by side on paper. We don’t carry parts on trucks or keep a local stock; we source the correct part for your specific door, which is what keeps the impact rating intact. Call (833) 842-6670 for a free estimate and we’ll quote your Henderson door on paper before any work begins.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.