Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Sliding & Patio Doors in Henderson: What to Know First
We repair, replace, and service Mr-Glass sliding and patio doors in Henderson as an independent Mr-Glass service provider. Most repairs and single-panel replacements are finished in one visit; full door replacements are usually scheduled within a week or two depending on the series and glass. Pricing runs $185 – $340 for common repairs and $1,450 – $4,200 for a full replacement, quoted upfront on paper before any work begins.
This page is for Henderson homeowners who already have Mr-Glass doors on the house and want them fixed by someone who knows the product line, not treated like a warranty claim that goes nowhere. If your door is dragging, fogged, hard to lock, or letting in the Henderson summer heat, call us at (833) 842-6670. A live person answers, day or night.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass builds a solid door, but every series has its weak points, and the Henderson climate finds them faster than most. Here’s what we see most often on Mr-Glass sliding and patio doors, and what we do about it.
- Roller wear on the 7000 Series sliding door. The tandem rollers on the 7000 Series are steel with a nylon tire, and in Henderson’s dust and heat the tire flattens and the track picks up grit, so the door starts to drag and then jumps the track. We replace rollers with OEM-matched hardware and clean and true the track rather than just greasing it and hoping. Greasing a worn roller buys you three months.
- Fogged dual-pane glass on Impact Series doors. When the seal on a dual-pane unit fails, moisture gets between the panes and the door looks permanently cloudy. Mr-Glass impact sliding doors use a laminated outer pane over an insulating unit, and a failed seal on the inner unit is the usual culprit, not the impact layer. We replace the sealed unit and leave the impact pane intact, which costs a fraction of a full door swap.
- Screen door sag and torn mesh on the Estate Series. Estate Series screen doors use a lighter aluminum frame that flexes at the top corners, and the rollers wear unevenly, so the door sags and the mesh tears at the handle. We re-square the frame, replace the rollers, and re-screen in the correct mesh weight so it doesn’t repeat.
- Sticking thresholds after a wet winter. Henderson gets monsoon rain that swells wood subfloor and shifts the threshold plate under a Mr-Glass patio door, and by July the door binds at the bottom. We check the sill and threshold plane first, not the door, because adjusting a door that’s binding on a shifted sill just moves the problem.
- Lock and handle failures on French patio doors. The multi-point lock on Mr-Glass impact French doors is a common failure point when the door has been slammed or the strike plate has shifted a sixteenth of an inch. We re-align the strike, adjust the hinges, and replace the lock cartridge with an OEM part, not a universal one that almost fits.
One thing worth knowing that Mr-Glass’s own site won’t tell you: the OEM roller they stock for the 7000 Series is a direct match, but the aftermarket roller sold at big-box stores is a near-match that wears faster in Henderson heat. We quote both on paper so you can see the trade-off and decide.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Sliding & Patio Doors Process
- 1
Phone call or free estimate. You call, a live person answers, and we ask what the door is doing. If it’s a repair, we schedule a visit; if it’s a replacement, we schedule a measure.
- 2
Diagnostics on site. We check the track, rollers, sill, threshold plane, glass seal, and lock alignment before deciding anything. About a third of the “door is broken” calls we run in Henderson turn out to be a track or sill problem, not the door.
- 3
Parts decision, quoted on paper. We lay out OEM versus quality aftermarket side by side, with the warranty implication of each spelled out. You pick. No pressure, no surprise line items later.
- 4
The repair or replacement. Most repairs are a single visit. Replacements are scheduled and completed in one day where the opening is standard. We pull permits where required and don’t leave a job half-finished.
- 5
The test. We open, close, lock, and check the seal on every door before we call it done. If it doesn’t slide true and lock clean, we’re not done.
- 6
The guarantee and the paperwork. Both manufacturer warranty layers registered in writing before we leave. Our 90-Day Done Right Promise on the workmanship. If something’s off, you call and we make it right, no arguing.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Sliding & Patio Doors Costs in Henderson
Here’s what Mr-Glass sliding and patio door work runs in Henderson. These are real ranges from jobs we’ve done, not a national average.
| Job | Typical Range |
|---|---|
| Roller replacement, one sliding panel | $185 – $265 |
| Track repair or re-true | $220 – $340 |
| Sealed glass unit replacement, dual-pane | $480 – $780 |
| Screen door re-screen and re-square | $145 – $240 |
| Lock or handle cartridge replacement | $160 – $280 |
| Full sliding glass door replacement, standard size | $1,450 – $3,200 |
| Impact sliding glass door replacement | $2,400 – $4,200 |
| Impact French patio door replacement | $2,900 – $4,600 |
What moves the price: impact versus non-impact glass, whether we’re replacing a sealed unit or the whole door, and the size of the opening. A wide slider over a Henderson living room runs more than a standard bedroom slider. We don’t quote from a table; we measure and quote on paper. Call (833) 842-6670 for a free estimate, and we’ll walk you through it.
Why Henderson Homeowners Call TruePane Windows & Doors Henderson for Mr-Glass Work
We’re a second-generation glazier’s shop, founded by Dale Kessler in 2008, and we’ve proudly served local communities for over 42 years through a heritage of craft. Our technicians have up to 18 years of experience, and they know the Mr-Glass lines because they’ve been working on them for years, not reading the manual for the first time on your patio.
Every job comes with our 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave. We’re also authorized installers for more than a dozen lines, including PGT, CGI, CWS, and ES Windows, so if a Mr-Glass part is discontinued or a different door is the right call, we can quote it side by side instead of selling you a patch. Upfront pricing. No surprises. And a live person answers the phone 24/7.
FAQs
Does repairing my Mr-Glass sliding door void the warranty? No, a repair by an independent service provider does not void the Mr-Glass manufacturer warranty, but a botched repair with non-OEM parts can void the warranty on that specific component. We register both warranty layers in writing after every job so you know exactly what’s covered.
Can you still get Mr-Glass parts in Henderson? Yes. Common OEM parts like rollers, locks, and screen hardware for current Mr-Glass series are available, and we quote OEM against quality aftermarket on paper so you can see the trade-off. Discontinued parts sometimes require an aftermarket equivalent or a component swap, and we’ll tell you which before we start.
Should I repair or replace my Mr-Glass sliding door? Repair the door if the frame, glass, and track are sound and the problem is rollers, locks, or a seal. Replace it if the frame is warped, the glass is impact-rated and the unit has failed, or the door is over 20 years old and parts are getting scarce. A $250 repair beats a $2,800 replacement when repair is the right call, and we’ll tell you which one it is.
How fast can you get to a Mr-Glass door in Henderson? Repair calls are usually scheduled within a few days, and we don’t promise same-day on planned work. A live person answers the phone 24/7 and can tell you the next available window when you call. Call (833) 842-6670.
Will the price change once work starts? No. We quote on paper, the price is fixed, and there are no change orders or surprise line items. If we open the door up and find something we didn’t see, we call you before we do anything, not after.
If your Mr-Glass sliding or patio door is dragging, fogged, or not locking the way it should, call TruePane Windows & Doors Henderson at (833) 842-6670 for a free estimate. A live person answers 24/7, we quote upfront, and we stand behind the work in writing. We’ll be there when we say.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.