Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Custom Windows & Doors in Henderson: What to Know First
TruePane Windows & Doors Henderson provides independent service, installation, and replacement of PGT custom windows and doors for homeowners across Henderson. Most custom PGT orders run four to eight weeks from field measurement to install day, and repairs on existing units are usually handled in a single visit. On price, we quote the manufacturer line side by side on paper before anything is ordered, because a custom PGT unit priced without that comparison is a bid you can’t check. This page is for Henderson homeowners who already own PGT windows or doors – in the older builds off Green Valley Parkway, the golf course homes near Lake Las Vegas, and the stucco-and-tile houses out toward Anthem – and want the work done right by people who know the product line. Call (833) 842-6670 for a free estimate.
How PGT Products Fail – and How We Fix Them
PGT builds a good window. We install and service enough of them that we can tell you where the specific weak points sit, and how the Henderson climate makes them show up.
- Vinyl sash corners pulling apart on WinGuard units. On impact-rated WinGuard vinyl, the welded corner joints take a beating from the daily thermal swing here – July afternoons over 110°F cooling to the low 80s at night. When a corner weld fails, you get a hairline gap that lets in wind-driven rain without a visible crack. We reseal and mechanically reinforce the joint rather than pushing a full-unit replacement.
- Fogged insulated glass in the Aluminum Series. The butyl seal on older PGT aluminum units dries out faster in Henderson’s low humidity and intense sun. Once the seal fails, the desiccant saturates and the pane fogs from the inside – no amount of cleaning fixes it. We replace the glass unit, and we check the glazing bead and setting block at the same time, because a failed block is usually what cracked the seal to begin with.
- Sliding patio door rollers flat-spotting. PGT sliding doors carry substantial glass weight, and the tandem rollers wear unevenly if the track picks up grit. You’ll notice the door dragging at one end of its travel before it stops rolling altogether. We replace the roller assemblies and level the panel so it tracks true, instead of forcing it and cracking the frame.
- Weatherstripping and sweep failure on casement and hung units. The sweep at the sill and the bulb seal around the sash degrade in UV. That’s the draft you feel in January, and it’s also where dust gets in during a spring wind event. We replace with the correct profile for the series, not a universal strip that leaves gaps at the corners.
- Hardware and multipoint lock misalignment on custom entry doors. Custom PGT doors with multipoint locking need the strike plates set to the actual frame, not the spec sheet. When a house settles, the lock binds and the door won’t latch fully. We re-set the hardware and confirm the lock engages at every point – a door that “mostly” locks is a door that isn’t secure.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Custom Windows & Doors Process
- 1
Call and phone diagnosis. A live person answers, day or night, and asks what the unit is doing – fogging, binding, draft, water intrusion – so we arrive with the right parts and the right questions.
- 2
On-site measurement and inspection. We measure every opening twice and check the frame, glass, and hardware. For custom orders, we confirm the exact series and finish against what’s actually in the wall.
- 3
The parts decision. Where OEM PGT parts are available and keep the warranty intact, we use them. Where an OEM part would mean a long lead time for a minor component, we tell you the aftermarket option and its trade-off on paper – you decide, not us.
- 4
The work. Repairs and installations are done to the manufacturer’s spec, with the flashing and sealant details that keep water out of a Henderson wall assembly.
- 5
The test. We operate the unit, check the lock and seal, and confirm it closes true before we call it finished.
- 6
The warranty registration and cleanup. Both warranty layers are registered in writing with durations stated before we leave, and the site is left as we found it.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Custom Windows & Doors Costs in Henderson
These are the ranges we see on real Henderson jobs. A firm quote follows a free on-site measure – these numbers are for planning, not a bid.
| Scenario | Typical range |
|---|---|
| Single fogged glass unit replacement (Aluminum Series) | $280-$520 |
| Sliding patio door roller and track service | $180-$340 |
| Casement or hung weatherstripping and sweep replacement | $150-$300 per unit |
| Custom PGT replacement window, supplied and installed | $650-$1,400 per opening |
| Custom PGT entry door with multipoint hardware | $2,400-$6,500 |
| Full custom window and door package (whole-home) | Quoted per home |
What moves the price: impact-rated versus standard glass, the series and finish, custom sizing versus stock, and whether the opening needs reframing. Call (833) 842-6670 to schedule a free estimate – we quote manufacturer lines side by side on paper so you see exactly what you’re buying.
Why Henderson Homeowners Call TruePane Windows & Doors Henderson for PGT Work
Our technicians have up to 18 years of experience, and PGT is one of more than a dozen manufacturer lines we install as an authorized installer. That matters when a custom order needs the right series and the right hardware the first time. Every job carries the 90-Day Done Right Promise: if it isn’t done right, we make it right, with no paperwork fights. The Keystone Standard means both warranty layers are registered in writing, durations stated, before we leave – so a fogged seal two years from now doesn’t turn into an argument about who’s responsible. We back up PGT work with the same crew across CGI, CWS, ES Windows, and ECO Window Systems, so you’re not stuck if a product line changes. We’re an independent PGT service provider, not affiliated with or authorized by PGT, and we tell you that plainly. The rule on the whiteboard still holds: if the pane is not true, the job is not done.
FAQs
No, when the work is done to spec with the correct parts – and that’s exactly why we register both warranty layers in writing before we leave. We’re an independent provider, so we document what we did and which parts we used, which is what a manufacturer needs to honor a claim. Call (833) 842-6670 and we’ll walk through your specific PGT unit.
Usually yes, though lead times vary by series and part. Some components are still in production; others need a compatible aftermarket match, and we’ll show you both options on paper with the trade-offs. Call (833) 842-6670 with your series and we’ll tell you what’s available.
Repair when the frame is sound and the problem is glass, seals, rollers, or hardware – that’s most jobs. Replace when the frame itself is failing or you’re upgrading to impact-rated glass. We’ll give you an honest read on both, with prices, and let you decide. Call (833) 842-6670 for a free assessment.
Custom orders typically run four to eight weeks from measurement to install, depending on series, finish, and glass package. Repairs on existing units are usually a single visit. We’ll confirm the timeline in writing when you order. Call (833) 842-6670 for current lead times.
Yes – impact-rated WinGuard units are common in those areas, and we install and service them regularly. We check the corner welds and seals that take the most punishment from the heat swing, which is where these units usually fail first. Call (833) 842-6670 to schedule.
Call (833) 842-6670 for a free estimate on your PGT custom windows and doors in Henderson. A live person answers every call, day or night. We’ll measure, quote the lines side by side on paper, and stand behind the work with the Keystone Standard and our 90-Day Done Right Promise.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.