Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Impact Windows & Doors in Henderson: What to Know First
We install, replace, and service PGT impact windows and doors in Henderson as an independent PGT service provider. A typical PGT window replacement runs three to five weeks from signed quote to final inspection, because impact glass is built to order at the factory – not pulled off a shelf. Expect to pay for the product you’re actually getting: PGT’s impact lines price above commodity vinyl, and we quote them on paper next to other manufacturer lines so you can see the difference line by line.
This page is for Henderson homeowners who already own PGT products and need them installed, replaced, or repaired – or who are weighing PGT against another line for a home that has to hold up to desert heat and monsoon season. Call (833) 842-6670 and a live person answers, day or night. Estimates are free, and the quote you get is the price you pay.
How PGT Products Fail – and How We Fix Them
PGT builds a solid impact product. What we see failing in Henderson homes is rarely the glass itself – it’s the parts around it, and the way our climate stresses them. Five patterns come up again and again:
- Vinyl impact windows (WinGuard series) with warped or bowed sashes. Henderson summers push exterior vinyl surface temps well past 150°F on west-facing walls, and over enough seasons the sash profile can distort, which throws the frame out of square and lets the lock stop lining up. The cause is heat cycling, not a manufacturing defect. Our fix is a full sash or unit replacement with the correct PGT profile – re-shimming a warped sash only buys you one more summer.
- WinGuard impact sliders and horizontal rollers that drag or jump the track. On sliding impact units, the rollers carry real weight because impact glass is heavier than standard annealed glass. The common culprit is flattened or seized rollers, sometimes paired with a track that’s collected grit over the years. We replace rollers with the correct load-rated hardware and true the track; we don’t oil a worn roller and call it done.
- Fogged or hazy impact glass from seal failure. When the perimeter seal on a sealed impact unit fails, moisture gets into the air space and the glass fogs permanently – no amount of cleaning fixes it. On PGT impact units this often shows up on the sunny south and west elevations first. The remedy is a factory replacement insulated glass unit; we measure the opening twice before ordering so the new unit fits the existing frame exactly.
- Failed weatherstripping and gaskets on impact doors and windows. Impact doors in Henderson get hammered by dust and UV, and the perimeter weatherstripping dries, cracks, and shrinks. You notice it as a door that whistles in a wind or a window that sweats on the interior. New OEM-spec gaskets and sweeps restore the seal without touching the frame.
- Leaks at the sill and head of impact units after monsoon season. A hard July storm finds the weak point – a failed bead of sealant, a blocked weep path, or a threshold that was never set to shed water correctly. We diagnose where the water is actually entering before resealing anything, and we correct the drainage path so the next storm drains the way it should.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Impact Windows & Doors Process
- 1
The call. A live person answers, 24/7. We ask what the PGT unit is doing – fogging, dragging, leaking, not latching – and set a time we’ll actually keep.
- 2
Diagnostics in the opening. A background-checked, uniformed technician measures the opening twice and identifies the real cause. Fogged glass, a warped sash, and a bad seal can look alike from across the room and couldn’t be more different to fix.
- 3
The parts decision, made on paper. Where OEM PGT parts are the right answer, we quote OEM. Where a quality aftermarket roller or gasket performs identically and costs less, we show you both and let you choose. We never substitute around a warranty requirement without saying so.
- 4
The work. Most repairs are completed in a single visit. Full impact window and door replacements are scheduled once the factory units arrive, and we protect floors and furniture the way we would in our own homes.
- 5
The test. Every unit gets operated, latched, and checked for seal and drainage before we pack up – on a door, that means opening and closing it enough times to trust it.
- 6
The Keystone Standard. Both warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. Our workmanship is covered by the 90-Day Done Right Promise, and we stand behind it.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Impact Windows & Doors Costs in Henderson
The honest answer: PGT impact work costs more than standard vinyl, because impact glass is built to spec and priced accordingly. Here is what the common jobs run in the Henderson market:
- PGT impact window replacement (installed, per unit): roughly $700 to $1,400 depending on size, series, and whether it’s a single hung or a larger slider.
- PGT impact patio or sliding door (installed): roughly $1,800 to $4,000 for a standard opening, higher for wide multi-panel units.
- Factory replacement insulated glass unit for a fogged PGT impact window: roughly $300 to $550, including labor, when the frame itself is sound.
- Roller, gasket, and hardware repair on impact sliders and doors: roughly $95 to $250 per unit.
What moves the price is glass area, series, the condition of the existing frame, and whether a permit is required for the scope. You’ll get no-hassle upfront pricing and a written line-item quote before any work starts – no surprise line items on the bill. Call (833) 842-6670 to schedule your free estimate; a square deal is the whole point.
Why Henderson Homeowners Call TruePane Windows & Doors Henderson for PGT Work
We’re a second-generation glazier’s company, founded in 2008 by Dale Kessler out of a principle that out-of-true installs and voided warranties were problems worth fixing permanently. Our technicians have up to 18 years of experience, and they measure every opening twice because the founding rule still governs the work: if the pane is not true, the job is not done.
Every PGT job is covered by the 90-Day Done Right Promise and The Keystone Standard – both warranty layers registered in writing before we leave. A live person answers the phone 24 hours a day, and we’ll be there when we say. As an authorized installer for more than a dozen manufacturer lines – including CGI, CWS, ES Windows, and ECO Window Systems alongside PGT – we can show you how the products compare side by side on paper, so you’re buying exactly what you think you are. Standing offers include $50 off any repair over $250 and a permanent 5% discount for seniors and veterans.
FAQs
No, as long as the work is done correctly and the replacement parts meet PGT’s specs. The two real risks are using non-compliant aftermarket parts or installing out of true, both of which can leave you with a denied claim. We register both warranty layers in writing before we leave, with durations stated, so you have the paperwork in hand if you ever need it. Call (833) 842-6670 and we’ll walk you through what your warranty actually covers.
Often yes. PGT is one of the larger impact manufacturers in the country, so many components stay available long after a series is retired – and where an OEM part is gone or priced out of reason, a quality aftermarket roller or gasket usually performs the same and we’ll quote both so you can decide. What we won’t do is substitute around a warranty requirement without telling you. Call (833) 842-6670 with the model and we’ll confirm current availability.
Repair it when the frame and sash are sound and the problem is glass, rollers, gaskets, or a seal; replace when the sash is warped or the frame is out of square. A fogged PGT impact window with a good frame is a glass swap, not a new window. A warped sash from a decade of Henderson heat cycling usually points toward replacement, and resealing won’t fix it. Call (833) 842-6670 and we’ll tell you which one you’re looking at – no pressure either way.
Most repairs are completed in a single visit, same day. Full replacements run roughly three to five weeks from signed quote to finished install, because the impact units are built to order and then scheduled once they arrive. We’ll give you the realistic date up front and keep it. Call (833) 842-6670 for a free estimate.
Not from us. We quote on paper, line by line, before any work begins, and the number you sign is the number you pay. If the technician opens something up and finds a genuine surprise – a rotted sill, a hidden leak path – we stop and show you before we touch it. No surprise line items, no second appointment left hanging. Call (833) 842-6670 for a free estimate.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson and nearby areas.