Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Custom Windows & Doors for Henderson Homeowners
Custom windows and doors are made to the exact dimensions of an opening, not pulled from a stock catalog, and in Henderson the reason to go custom is usually one specific aggravation: a door that binds by mid-July or a window that lets the afternoon sun cook a west-facing bedroom. We measure every opening twice, quote manufacturer lines side by side on paper, and set the glass in a way that survives a Nevada summer as long as the wall does. Our technicians bring up to 18 years of glazing experience to the job, and we register both warranty layers in writing before we leave. When a frame has warped a quarter inch out of square, or a homeowner wants an arched dining room window that matches 1990s construction, custom is what closes the gap. Call (833) 842-6670 and a live person will answer, day or night.
Key Takeaways
- Every custom opening in Henderson is measured twice and built to the millimeter.
- The Keystone Standard means both manufacturer warranty layers are registered in writing, with durations stated.
- 90-Day Done Right Promise covers the workmanship on every install.
What Our Custom Windows & Doors Service Includes
A custom order is only as good as the field work behind it. We handle the measuring, the manufacturer line selection, the permitting, and the setting, from a single new slider to a full first-floor buildout. Here is what each piece of the work involves.
Custom Window Fabrication and Installation
Custom windows are built to the exact width, height, and shape of an existing opening so the trim and interior finish land flush without shimming gaps that open up. You need them when a stock size leaves you with a wide reveal line, when a wall has settled out of square, or when a homeowner wants a casement, awning, or fixed picture unit that a catalog cannot supply. We authorizes the order on PGT and CGI lines and set each unit with a continuous sill pan and a backer sealant bead, then verify the balance and operation with a feeler gauge and a square before trim goes back on.
Custom Door Fabrication and Installation
Custom doors cover the openings that standard 32- and 36-inch stock leaves misaligned: sliders, French doors, entry doors with sidelites, and the odd oversized passage into an open-plan living space. They matter when a door has settled so far the latch no longer catches, or when a homeowner wants a style that has to be ordered to the existing jamb. We set each door against the level and check the gap at top, bottom, and both stiles, because a door that looks right on day one and binds in August was never actually square. We’re an authorized installer for more than a dozen lines, including Marvin and ES Windows, so the quote shows real options on paper.
Impact-Rated Windows and Doors
Impact glass is laminated or otherwise built to withstand wind-borne debris and reduce heat transfer, and it matters most on the Henderson edges where the valley meets open terrain and gusts carry grit. When a homeowner wants the same protection as a storm-belt house, impact units are the answer, and they also cut summer solar gain on a south-facing wall. We quote impact lines side by side, install to the manufacturer’s anchoring schedule, and register every warranty before the truck leaves the driveway.
Energy-Efficient Glazing and Glass Options
Low-E coatings, argon fill, and thermally broken frames are what separate a window that keeps the air-conditioned air in from one that fights the compressor all afternoon. They matter in a Henderson home facing west, where summer surface temperatures at the glass run high enough to make a single-pane unit fog on the inside. We sit down with the homeowner and lay out coating, fill, and frame options for each opening, then recommend the one that fits the exposure instead of the most expensive one on the sheet.
Sliding, Patio, and Multi-Panel Doors
Sliding and multi-panel doors open a wall to a patio or courtyard, and they need track and alignment work that a swing door never touches. They matter when a track has filled with dust, a panel jumps off the rollers, or a homeowner wants a bigger opening than the current frame allows. We check the track for level, verify the rollers and the screen mechanism, and set the sill pan so a monsoon downpour cannot pool where it shouldn’t.
Custom Glass Railings and Fixed Glazing
Glass railing systems and fixed glazing serve balconies, stairwells, and interior sightlines where the homeowner wants the view to stay open while the code requirement gets met. These are worth considering when a Henderson property has a second-story balcony or a pool-side stair that needs a guard rail without a solid wall. We measure for the base shoe, verify the anchoring into the structure, and set tempered panels to the manufacturer’s spacing so the result reads as one clean plane.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Brands We Service for Custom Windows & Doors
We live and work in the same climate our customers do, and we know where each manufacturer line performs and where it needs extra attention. PGT impact and vinyl lines hold up well on the exposed Henderson edges, and we know their anchoring schedules and where the frame stress shows up after a decade of thermal cycling. CGI offers a solid range for textured stucco walls, and we have installed enough of their units to know the trim and flashing detail that keeps a tight seal. CWS and ES Windows round out the custom and slider work, and each one has its own measurement quirks we account for before the order goes in.
We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Milgard, and Jeld-Wen, and we never treat a brand name as a shortcut past the measuring tape. The brand on the frame tells you what the glass is; the install tells you whether it will last. Whether you have PGT or any other make, we can help, and the side-by-side quote on paper shows exactly what each line delivers.
Signs You Need Custom Windows & Doors Right Now
- Daylight showing at a closed door. If you can see a sliver of light around a closed door, the weatherstripping is shot or the frame has gone out of square, and every summer afternoon pumps cool air straight out through that gap. It’s a simple enough fix when it’s caught early.
- Fog between the panes. Fog or condensation trapped between the glass layers means the seal has failed, and once the desiccant is saturated the unit is done. It won’t stop on its own, and it gets worse with every thermal cycle.
- A door that binds from July through September. If the strike side drags on the jamb when the heat peaks, the frame has swelled or the header has shifted; left alone, the latch eventually fails altogether. A custom set reset to plumb cures it.
- Uneven sill gaps or sticking sash. A window that sticks or a sill gap that grows season to season signals movement in the wall or frame. That’s the kind of thing measuring twice catches, and it’s the reason a custom unit matters here.
- Pre-2000 single-pane glass facing south or west. If your home predates 2000 and the exposed elevations still carry original single glazing, the summer heat load is going straight through. A modern custom unit with Low-E and argon cuts that load and quiets the street noise that comes with it.
Our Custom Windows & Doors Process – Step by Step
- 1
Measure and sketch every opening. We take each width, height, and depth to the inch, sketch the reveal, and note any out-of-square condition before a single number goes to the manufacturer. This is where most installs go wrong, and it’s why we do it twice.
- 2
Lay out manufacturer options side by side on paper. We build a written quote for each line that fits the opening, showing glass, frame, and warranty duration next to each price. The homeowner sees exactly what they’re buying instead of a lump sum and a handshake.
- 3
Order, permit, and schedule. We handle the permit and the order together so the timeline doesn’t stall waiting on one or the other, and we confirm the install date with a live person on the phone. If anything shifts, you hear it from us directly.
- 4
Install, level, and verify. On install day, the crew sets the sill pan, backer sealant, and anchoring to the manufacturer’s schedule, then checks every unit with a level, square, and feeler gauge. A door that closes flush and a sash that slides without drag is the standard, not a bonus.
- 5
Register both warranty layers and clean up. Before the truck leaves, we register both warranty layers in writing with the durations stated, walk the work with the homeowner, and point out the new operation of every unit. The 90-Day Done Right Promise stands behind it from that day forward.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Windows & Doors Cost in Henderson?
Most custom window orders in Henderson run between $650 and $1,500 per unit installed, with the price moving on size, glass package, and frame material. A custom entry door with sidelites typically lands between $2,400 and $6,000 installed, while a full impact-rated patio slider often runs $3,500 to $9,000 depending on span and glazing. A single fixed picture window set into an existing stucco wall is the lower end; a full first-floor of matching custom units is the higher end, and we quote each opening line by line so the homeowner sees where the money is going.
Several things move the number. Glass package is the biggest: impact-rated laminated units and Low-E with argon cost more than clear single glazing, but they also cut cooling bills on the exposed elevations. Frame material matters too, since thermally broken aluminum and fiberglass carry a premium over vinyl. Out-of-square openings and header repair add labor, and structural changes need a permit and inspection. You avoid overpaying by making us quote two or three manufacturer lines side by side instead of taking the first bid handed to you. Your free estimate includes the in-home measurement, all manufacturer quotes on paper, the warranty durations stated, and a permit schedule, with no surprise line items on the final bill.
Custom Windows & Doors Near Henderson – Our Service Area
We work across the Las Vegas Valley, from Green Valley and Anthem to the historic homes in the Henderson core, and we’re in Whitney and Paradise just as often as we’re in Winchester or Enterprise. Spring Valley and Summerlin see plenty of retrofit work on 1990s construction, and we travel to Boulder City, Sunrise Manor, North Las Vegas, Sandy Valley, and Las Vegas proper on the same schedule. Our home page covers the full range of window and door work, and the custom windows and doors in Henderson page goes deeper on valley-specific conditions.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Custom Windows & Doors in Henderson
A custom unit is manufactured to the exact dimensions and shape of your opening rather than cut down from a stock size, and you need one when the wall is out of square, the opening is non-standard, or you want a style, finish, or glass package a catalog can’t supply. It also makes sense when an older Henderson home has settled and a stock frame would leave visible shim gaps and drafts. We’ll tell you honestly at the measure whether a custom unit is warranted or whether a stock size does the job just as well, and the quote on paper will show both.
Expect three to six weeks from order to installation for most custom units, and one to three days on site for a typical single-floor batch. Lead time depends on the manufacturer, glass package, and whether the job needs a permit and inspection. We put the timeline in the written quote and confirm the install date with a live person, so nothing sits waiting on a voicemail. If a line runs long, you hear it from us before the date arrives.
Most Henderson homeowners spend between roughly $8,000 and $30,000 on a custom project, depending on how many openings, the glass package, and the frame material. A single custom door is far less than a full first-floor replacement; impact glazing on the whole house is at the upper end. Call (833) 842-6670 for an exact quote, because estimates are free and the side-by-side manufacturer quotes tell you more than any range.
Yes, we install and service PGT, CGI, CWS, and ES Windows products, along with more than a dozen other manufacturer lines. Our technicians know how these frames behave in valley heat and where the sealing and anchoring details need extra attention. If your existing unit is a brand not on the list, bring the make and model to the measure and we’ll tell you what we can do.
For urgent problems like a shattered pane, a door that won’t secure, or storm damage, call (833) 842-6670 and a live person answers around the clock to get a plan in place. Custom units made to exact size take the full lead time, but we can board, secure, or temporarily seal an opening so the home stays protected in the meantime. We won’t pretend a custom window comes off a shelf the same day, and you’ll always know exactly what is happening and when.
Every job carries the 90-Day Done Right Promise on workmanship, and The Keystone Standard means we register both manufacturer warranty layers in writing, with the durations stated, before the truck leaves your driveway. There’s no fine print to read at 11 p.m. and no arguing about whether a failure is covered. If something we installed isn’t right, we make it right.
Clear furniture and wall hangings about three feet back from each opening, remove blinds and curtains ahead of the crew, and plan to keep pets in a closed room while the work is under way. Have the manufacturer quote and permit handy so you can confirm the order details with the crew lead. Beyond that, just leave the driveway clear, and we’ll handle the rest.
Schedule Your Custom Windows & Doors Service in Henderson Today
Whether it’s one stubborn door or a full first floor of new windows, we’ll measure it twice, quote it on paper, and stand behind it in writing. Call (833) 842-6670 for a free, no-obligation estimate; a live person answers every call, day or night. We’ll be there when we say, and if the pane isn’t true, the job isn’t done.
Written by the team at TruePane Windows & Doors.