Entry doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
See the difference
Before
After
Before
After
Before
AfterEntry Doors in Henderson, NV
An entry door is the first thing a visitor touches and the last thing a homeowner worries about until it stops closing right. Most Henderson homeowners call us when the front door has finally given out after twenty years of desert sun, or when a draft along the threshold has become impossible to ignore. We install, replace, and service entry doors across Henderson, and we treat every one of them as a fitting problem before it is a hardware problem.
If the door isn’t hung true, no amount of weatherstripping will fix it. That rule is what TruePane Windows & Doors Henderson was built around, and it governs every front door, side door, and service door we set. Reach us anytime at (833) 842-6670 and a live person answers, day or night. For the full picture of how entry doors fit alongside patio, sliding, and interior doors, see our Door Installation page; for more on the parent service in Henderson, that same page walks through the whole line.
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows, and we quote those lines side by side on paper. You see exactly what you’re buying before you commit to it. Our technicians have up to 18 years of experience, and every job carries The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway.
Key Takeaways
- Entry door replacement in Henderson typically runs $650-$2,800 installed, depending on material, size, and whether the frame is being replaced.
- We register both manufacturer warranty layers in writing on every job, no exceptions.
- The 90-Day Done Right Promise covers workmanship: if it isn’t done right, we make it right.
- Most entry door installs are completed in a single visit.
- A live person answers the phone 24/7 at (833) 842-6670.
When You Need Entry Doors
Henderson homes sit in one of the harshest sun-and-heat environments in the country. A west-facing front door can take nine hours of direct afternoon sun in July, and the material tells you so within a few years. Here’s what brings people to call us:
- The door binds in summer and drafts in winter. This is the classic Nevada Valley symptom. Heat expands the slab, the frame swells, and by August the door is dragging on the threshold. When it shrinks back in January, air pours through the gap. That pattern almost always points to a frame that wasn’t set true, not a door that needs planing.
- The threshold leaks during monsoon season. Henderson gets late-summer storms that drive rain sideways. An entry door with a failing sill pan or worn sweep will let water under the slab, and by the time you notice a stain on the interior floor, the damage underneath is already there.
- The door is visibly warped or delaminated. Wood entry doors in this climate are the most vulnerable. Sun and dry air pull moisture from the edges, and once the skin separates, no finish will hold it together.
- The hardware has given out. Locks that stick, deadbolts that no longer throw cleanly, hinges that squeal or sag. Sometimes the door is fine and only the hardware needs replacement, which is a much smaller job.
- The door is original to a 1990s or earlier build and you’re staying put. Original builder-grade doors on homes in neighborhoods like Green Valley and Anthem are reaching the end of their service life. If you plan to stay, it’s worth doing once with a door that will outlast the next owner.
- You want a security upgrade. A solid-core or steel entry door with a proper strike plate and reinforced frame is a real improvement over a hollow-core unit. We can walk you through which entry doors meet that bar for your opening.
Our Entry Doors Process
- Measure the opening twice. Not the door. The opening. Slab dimensions get measured, the frame gets checked for plumb and square, and the sill height is recorded. We do this before we quote a manufacturer line so the quote reflects the actual job.
- Quote the lines side by side on paper. We put PGT, CGI, ES Windows, and other available lines next to each other so you can compare material, warranty duration, and cost on one page. No verbal estimates you have to remember later.
- Confirm the installation approach. Sometimes the existing frame is sound and we can hang a new door slab in it. Sometimes the frame itself is warped or the threshold has rotted and a full unit replacement is the right call. We tell you which and why, with pricing for each.
- Install, set true, and seal. The door is hung plumb, square, and level, so it opens a full 90 degrees without dragging at any point. Weatherstripping, sweep, and threshold are set to actually seal. We test the door through its full swing before we call it finished.
- Register both warranty layers in writing. Under The Keystone Standard, we register the manufacturer warranty and our workmanship coverage before we leave the driveway, with durations written out on paper you keep. This is the step most installers skip.
- Walk you through it. We show you how the door should feel and close, what to do if the finish needs touching up, and what the 90-Day Done Right Promise covers. If anything is wrong in the first 90 days, we make it right, no arguing.
Most entry door jobs are finished in a single visit, and we work in your home the way we’d work in our own family’s: shoes off the carpet, drop cloths down, cleanup before we go. Our technicians are background-checked and uniformed on every call.
Entry Doors Pricing in Henderson
Entry door pricing in Henderson runs from roughly $650 for a basic steel replacement installed with existing frame intact, up to about $2,800 for a full unit replacement with a high-end wood or fiberglass door and new frame. The numbers below reflect what we actually see in this market.
| Item | Typical Range (Installed) |
|---|---|
| Steel entry door, slab replacement | $650-$1,200 |
| Fiberglass entry door, slab replacement | $950-$1,800 |
| Wood entry door, slab replacement | $1,100-$2,100 |
| Full unit replacement (door + frame + threshold) | $1,600-$2,800 |
| Hardware upgrade (lockset, deadbolt, hinges) | $150-$450 |
| Threshold and sweep replacement only | $120-$280 |
What moves the price: door material (fiberglass costs more than steel, wood costs more than both), whether the frame is being replaced, sidelight or transom add-ons, and finish options. A custom-width door will sit at the upper end of any range.
We give a free, written estimate before any work begins. No surprise line items on the bill, and no second appointment left hanging. We quote in writing and we stand behind the number. There’s also a standing $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
To schedule a free estimate on entry doors in Henderson, call (833) 842-6670. For the parent service, and for comparison, see what’s involved in Door Installation in Henderson.
FAQs – Entry Doors
How much does an entry door cost in Henderson?
Entry door replacement in Henderson typically runs $650 to $2,800 installed, depending on material, door size, and whether the frame is being replaced. Fiberglass typicals run higher than steel, and full unit replacement sits at the upper end. Call (833) 842-6670 for an exact quote, estimates are free.
Can you install an entry door in a single visit?
Yes, most entry door installs are completed in a single visit. A slab replacement with the existing frame intact takes a few hours. A full unit replacement takes longer but is still usually done the same day. Call (833) 842-6670 to find out what your job needs.
What is the 90-Day Done Right Promise?
The 90-Day Done Right Promise means that if anything about your entry door install isn’t right in the first 90 days, we come back and make it right, no paperwork, no arguing. It covers workmanship. We register both manufacturer warranty layers in writing before we leave your driveway on every job. Call (833) 842-6670 with questions.
Should I repair or replace my entry door?
It depends on three things: the condition of the frame, whether the door is warped or just binding, and what you plan to do with the house. If the frame is sound and the door is intact, new hardware or weatherstripping may be all you need. If the frame is out of square or the door has delaminated in the heat, replacement is usually the right investment. We’ll tell you honestly which one applies, and quote both. Call (833) 842-6670 for a free assessment.
Why our entry door work holds up: We’ve been serving local communities for over 42 years through a heritage of craft and community commitment, and we plan to be here in thirty years. If the pane is not true, the job is not done. That’s the rule that governs every entry door we set, and it’s the reason you won’t find yourself calling someone else in five years to fix what we should have done right the first time.
Call (833) 842-6670 for a free estimate on entry doors in Henderson. A live person answers 24 hours a day, 7 days a week, not a voicemail tree. We’ll be there when we say.
Written by the team at TruePane Windows & Doors Henderson, serving Henderson.