Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateFast, Reliable Custom Windows & Doors Across Paradise
If you’re ordering a custom window or door in Paradise, the job starts long before the first pane is cut. Paradise is unincorporated, so the permit runs through Clark County, and in the condo towers and HOA tracts along the Strip corridor the design review approval and the HOA’s frame-color palette both have to clear before a single unit is ordered. We know those approvals, we know what the desert heat does to original aluminum sliders, and we quote the whole scope on paper so nothing moves once the work begins. Call (833) 842-6670 for a free estimate.
Why TruePane Windows & Doors Henderson Is Paradise’s Preferred Custom Windows & Doors Company
Paradise homeowners call us because they’ve already had one bad install. A fogged seal. A door that binds every July. Our technicians have up to 18 years of experience, they measure every opening twice, and they quote manufacturer lines side by side on paper so you see exactly what you’re buying. We’re an authorized installer for more than a dozen lines, including CWS and ES Windows, and every job is covered by our 90-Day Done Right Promise. If it isn’t done right, we make it right.
Under The Keystone Standard, both manufacturer warranty layers get registered in writing, with durations stated, before we leave. That matters most in Paradise’s HOA and condo tracts, where a re-order on an unapproved frame color can stall a job for weeks. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a call center. We’ve served local communities for over 42 years, and we plan to be here in thirty more.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Custom Windows & Doors Services in Paradise
Custom work in Paradise isn’t the same as custom work in a new-build subdivision on the valley’s edge. The housing stock is largely postwar through 1990s tract homes, condos, and townhomes, and a large share of the 1960s to 1980s units still carry their original single-pane aluminum frames. That history shapes how we scope every job here.
HOA and DRFN-Approved Custom Frame and Color Matching
In Paradise’s planned communities and condo towers, the Design Review and Fine Notice process and the HOA’s own architectural approval govern materials, colors, and frame styles. We match your unit to the approved palette before the order goes in, so a wrong color doesn’t trigger a re-order after review. This is as much permit and approval navigation as it is installation.
Re-Squaring Heat-Expanded Aluminum Slider Openings
Mojave thermal cycling routinely heat-expands 1980s aluminum slider frames out of square in Paradise. Before any new panel will track, the opening itself has to be re-squared, refit, and shimmed. Skip that step and the sash binds on the jamb from day one. We check the opening before we spec the door, not after.
Custom Impact-Rated and Low-E Glazing Specification
With summer heat past 100°F and monsoon wind events that pit glass and drive dust into failed seals, low-E insulated glass is a genuine necessity in Paradise, not an upgrade. Where impact is wanted, we specify a laminated interlayer. We confirm the SHGC and impact rating against the code intent before the unit is ordered, so the spec matches what you’re paying for.
Custom Windows and Doors for Outbuildings and Detached Structures
Lots in Paradise that carry a shop, outbuilding, or detached ADU need their door and window specs checked against county septic and well setbacks first. We confirm that before the order locks. It’s cheaper to catch a setback problem at quote than to re-cut a frame after delivery.
Trusted Brands We Service in Paradise
We install, replace, and service windows and doors across more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, CGI, ECO Window Systems, and Mr-Glass. If your existing unit is one of those, we can source replacement parts or a matched panel rather than pushing you into a full reorder. We don’t keep parts on a truck; we order to the job and quote lead times in writing. In Paradise’s condo corridors, where matching an existing frame profile matters to the HOA, that approach saves both time and argument.
See the difference
Before
After
Before
After
Before
AfterCommon Custom Windows & Doors Problems We See in Paradise Homes
These are the failures we run into most often on Paradise custom work, and each one traces back to something specific about the location or the age of the building.
- A frame ordered in a color the HOA never approved. The DRFN review bounces it, and the install stalls while a new unit is ordered. Confirm the approved palette before the order, every time.
- A 1980s aluminum slider opening that was never re-squared. The heat-expanded frame stays out of true, the new panel binds on the jamb, and the sash never tracks clean. The opening gets refit and shimmed before the panel is set.
- Original single-pane units with failed seals measured cold. The spec goes in without confirming low-E SHGC or impact rating, and the finished door misses the energy and code intent it was supposed to meet.
- An outbuilding or detached ADU spec’d before setbacks are checked. The door and window are locked in, then the county septic and well review surfaces a problem. Confirm the setbacks first.
Pricing for Custom Windows & Doors in Paradise, NV
Custom window and door pricing in Paradise runs higher than a stock replacement, mostly because of the approvals and the opening work. A typical custom window in Paradise runs $650 to $1,400 per unit installed. A re-squared aluminum slider opening adds $250 to $600 depending on how far out of square the frame has gone. HOA and DRFN color matching adds $150 to $400. Impact-rated glazing adds $400 to $900 per opening. A detached ADU or outbuilding door with set back review adds $200 to $500. Every quote is line-item and fixed, with no change orders, so the number on the estimate is the number on the bill. Call (833) 842-6670 for a free estimate.
We Also Serve Cities Near Paradise
The same approach travels well across the valley. We take on Custom Windows & Doors work in Winchester, Whitney, Spring Valley, and Enterprise, and the county permitting and heat-expanded slider issues are much the same. If your property sits near the Paradise line, call and we’ll confirm coverage before we quote. (833) 842-6670.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Custom Windows & Doors in Paradise
Because in Paradise’s condo towers and HOA-governed tracts, the Design Review and Fine Notice process and the HOA’s architectural approval dictate the materials, colors, and frame styles, and an unapproved color forces a re-order and a stalled install. That’s why we clear both before the unit is ordered. Call (833) 842-6670 for a free estimate and we’ll walk through the approval steps with you.
Not always. In most Paradise cases the frame has heat-expanded out of square, so the opening needs to be re-squared, refit, and shimmed before a new panel will track clean, and sometimes the existing panel can be refit rather than replaced. We measure cold and check the opening before recommending a full replacement. Call (833) 842-6670 to schedule a free estimate.
The county. Paradise is unincorporated, so the permit runs through Clark County rather than a city building department, and we pull the permit and pass the inspection as part of the job. You don’t file it yourself. Call (833) 842-6670 for a free estimate.
The septic and well setbacks for that structure have to be checked before the door or window spec is locked, because a setback conflict means re-cutting a frame after delivery. We confirm the county setbacks first, then order. Call (833) 842-6670 and we’ll scope it on the estimate.
Yes, and in Paradise it’s close to necessary rather than optional. Summer sun past 100°F pushes single-pane units through extreme thermal cycling, and low-E insulated glass with the right SHGC reduces the solar gain that drives cooling cost and degrades seals. We spec the SHGC and impact rating to the code intent before ordering. Call (833) 842-6670 for a free estimate.
If a custom window or door in Paradise is on your list, the next step is a free estimate. Call (833) 842-6670 and a live person will pick up, any hour of the day, any day of the week. We’ll confirm the county permit path, the HOA and DRFN requirements, and the opening work, then put a fixed line-item quote in front of you. Done right the first time, backed in writing.
Written by the team at TruePane Windows & Doors.