Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Door Installation for Henderson Homeowners
The house is fine until the door starts telling you otherwise. In Henderson, that usually shows up as a front door that swells tight in July, a patio slider that grinds on grit blown in from the desert side, or a seal that quit years ago and now lets the afternoon heat straight into the hallway. We handle door installation in Henderson with technicians who have up to 18 years of experience, and we measure every opening twice before anything gets ordered. We’re an authorized installer for more than a dozen manufacturer lines, we put quotes side by side on paper, and a live person answers the phone at (833) 842-6670 any hour of the day.
What Our Door Installation Service Includes
Every job falls under The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave the driveway. And every install carries the 90-Day Done Right Promise – if it isn’t done right, we make it right, with no paperwork fight attached.
Entry Doors
An entry door is the one opening in the house that has to do three jobs at once: seal out weather, hold a deadbolt in real wood or steel, and look right from the street. We see a lot of Henderson entry doors that were hung years ago with a half-inch of shim and a prayer, and now they drag at the strike side every August. We set entry doors level and plumb, flash the sill correctly against our wind-driven rain, and check the lock alignment with the door in its final position, not before.

Hurricane-Proof Front & Entry Doors
Impact-rated entry assemblies matter in the Las Vegas Valley because summer storms here arrive fast and carry debris, and a breached front door turns the whole house into a wind tunnel. These doors pair laminated or reinforced glazing with a heavier frame and hardware rated for the pressure. We install hurricane-rated front and entry doors for Henderson homeowners who want the opening to hold up, and we register the warranty paperwork for the impact rating so it’s documented rather than promised verbally.

French & Double Doors
French and double doors are two leaves that must meet in the middle and stay meeting there – the astragal, the head jamb, and the inactive leaf’s shoot bolts all have to agree. On a Henderson west-facing wall, a double door that isn’t shimmed at the correct points will sag within a couple of seasons and the two panels will rub. We hang both leaves as a unit, check the reveal gap top to bottom on each side, and adjust the hardware so the active leaf latches with a thumb and not a shoulder.

Replacement Doors
Replacement work is most of what we do, and it starts with an honest look at the existing opening: rotten sill plate, out-of-square frame, or a wall that has moved since the original door went in. A straight swap of slab into an old frame only works when the frame is sound. We pull the old unit, inspect and repair the rough opening, then set the new door with flashing and a sill pan so water has somewhere to go other than into the wall cavity. If you’re also weighing a bigger change, our overview of Door Installation in Henderson covers how we scope it.
Storm & Exterior Doors
Storm and exterior doors take the sun and the grit, and the cheap ones tell you within three years. A back door on a Henderson property facing south can hit 150 degrees on the surface, and the finish and weatherstrip are the first things to go. We install exterior doors with UV-stable finishes, adjustable thresholds, and sweep seals that actually touch the floor. For doors that come with adjacent glazing, our window and door work covers how we tie the two together so the trim lines match.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Brands We Service for Door Installation
We install and service doors from PGT, CGI, CWS, and ES Windows, among others, and each brand has quirks worth knowing. PGT impact door systems are built for coastal wind ratings and are heavier than most residential doors, so the frame and hinge reinforcement we specify is different from a standard entry. CGI’s door lines are known for thermal performance, and their thresholds and sill details reward careful flashing more than brute force.
CWS entry and patio door systems have a devoted following in the desert Southwest, and we know where their finish coats wear first on a sun-facing door. ES Windows builds to tight tolerances, which means the rough opening has to be right the first time. Whether you have a PGT door, a CGI slider, or a brand we haven’t named here, we can help you choose, order, and install it correctly.
Signs You Need Door Installation Right Now
- The door sticks in summer and swings free in winter. That’s thermal movement in a frame that wasn’t shimmed correctly, and it will only get worse. Left alone, it wears the hinges and eventually cracks the jamb.
- Daylight visible around the closed door. A gap at the strike or top jamb means the weatherstrip is failing or the door is twisted. In Henderson, that gap is also where cooled air goes out and dust comes in.
- Water staining on the sill or interior floor. A failed sill pan or flashing lets rain in sideways, and it’s the most common cause of rot under an exterior door. Fix it before the subfloor is involved.
- Fogged or cracked glass in the door lite. A failed seal means the insulating gas is gone and the glass is no longer doing its job. A cracked lite in a hurricane-rated door weakens the whole assembly.
- The lock no longer lines up. If you’re lifting the door to throw the deadbolt, the door has sagged or the frame has shifted. That’s a security problem, and it’s fixable before it becomes a break-in story.
Our Door Installation Process – Step by Step
- 1
Measure and inspect. We measure the opening at multiple points – top, middle, bottom, both sides – because a Henderson wall can be out of square by a surprising amount. We also check the sill for rot and the rough opening for water history before a single word of pricing.
- 2
Side-by-side quote on paper. We lay out the manufacturer lines side by side, with the door, hardware, finish, and warranty durations spelled out. You see exactly what you’re buying and what it costs, with no line items appearing later.
- 3
Order and confirm. We confirm the door spec against the field measurements and place the order. Lead times are stated up front, and we don’t disappear between the deposit and the delivery date.
- 4
Install and seal. On install day, we pull the old unit, repair the rough opening, set the new door level and plumb, flash the sill, and seal the perimeter. We check the locks, the weatherstrip, and the threshold in their final position.
- 5
Register both warranty layers and walk you through. Before we leave, both manufacturer warranty layers are registered in writing with durations stated. We show you the paperwork and leave it with you, and the 90-Day Done Right Promise covers the work.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Door Installation Cost in Henderson?
Door installation in Henderson typically runs $450 to $1,100 for a standard entry door, and $1,800 to $4,500 for a French or double door depending on size and glass. A basic storm or exterior door sits around $350 to $800 installed, while a hurricane-rated front or entry assembly with impact glazing can land between $2,200 and $5,500. The price moves with the door size, the material (steel, fiberglass, or wood), the type of glazing, and what’s waiting behind the old door – a rotten sill or an out-of-square frame adds labor and material.
To avoid overpaying, get the quote in writing with the door model and the warranty durations stated, and ask what happens if the rough opening needs repair. That’s where surprise line items come from. Our free estimate includes the measurement, a side-by-side comparison of manufacturer lines, and a written price that doesn’t change unless you change the scope. Seniors and veterans get a permanent 5% discount on top of that.
Door Installation Near Henderson – Our Service Area
We work throughout Henderson and the surrounding valley, including Whitney, Paradise, Winchester, Enterprise, and Boulder City, with regular calls out to Spring Valley, Summerlin, North Las Vegas, and Sandy Valley. Response times vary with the schedule, but a live person answers the phone at (833) 842-6670 around the clock to book a measurement or answer a question. If you’re nearby, our Door Installation in Whitney and Door Installation in Paradise pages cover those areas in more detail.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Door Installation in Henderson
Door installation is the removal of an existing door and frame, repair of the rough opening, and the setting of a new door unit level, plumb, flashed, and sealed. It covers entry doors, exterior and storm doors, French and double doors, replacement doors, and hurricane-rated assemblies. TruePane handles the measurement, the order, the install, and the warranty registration in one job. Call (833) 842-6670 for a free estimate.
Most single entry door installations take three to five hours, and a French or double door usually takes a full day. Custom orders add lead time before install day, which we state in writing with the quote. Once the door is on site, most jobs are completed in a single visit. Call (833) 842-6670 to get your door measured and scheduled.
Entry door installation in Henderson typically runs $450 to $1,100, French and double doors $1,800 to $4,500, and hurricane-rated assemblies $2,200 to $5,500, depending on size, material, and glazing. Rough-opening repair adds cost if the sill or frame is damaged. Call (833) 842-6670 for a free written estimate – we put the door model and warranty durations on paper.
Yes – we install PGT and CGI door systems, along with CWS, ES Windows, and more than a dozen other manufacturer lines. Each brand has its own frame and hardware details, and we measure the opening for each one specifically. Call (833) 842-6670 to talk through which line suits your opening and your budget.
We answer the phone 24 hours a day, seven days a week, so call whenever a door problem turns urgent. A door that won’t close, a broken lite in a hurricane-rated door, or water coming in at the sill all need attention before they get worse. We can’t promise an install the same day, but we can talk through the problem and get you scheduled. Call (833) 842-6670.
Every job comes with The Keystone Standard – both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves. The 90-Day Done Right Promise covers our workmanship: if it isn’t done right, we make it right, with no arguing and no fine print. Call (833) 842-6670 and we’ll walk you through the coverage before you commit.
Clear the path to the door on both sides and remove anything breakable from the immediate work area. Our technicians are background-checked and uniformed, and they’ll need access to the door from inside and outside while the old unit comes out. If you have pets, plan to keep them in another room. Call (833) 842-6670 with any questions before install day.
Schedule Your Door Installation Service in Henderson Today
A door that’s out of true is a door that will keep costing you – in energy, in repair, and in the nagging feeling that it’s still not right. We’ll measure it, quote it plainly, and install it so it closes the way it should the first time. Call (833) 842-6670 for a free, no-obligation estimate, and a live person will answer.
Written by the team at TruePane Windows & Doors Henderson.